Please tell me how to fix this. I can’t even do the camera calibration. Thank you!

Roderick

2024-12-21

88

3

0

Reasons for the problem of laser engraving not being roundDuring laser engraving, there may be issues with roundness. This is mainly caused by the following reasons:1. Unreasonable device parameter settings: If the device parameters are inaccurate or unbalanced, the accuracy and quality of the carved object will be affected, resulting in irregular ...

Keegan

2024-12-23

47

0

0

have a Creality Falcon2 22 watt laser. I am running the most current version of a licensed version of Lightburn on a Dell XPS with Windows 11. Everything was working fine yesterday but when I went to run a file from yesterday and a new one from today both frame and engrave upside down/backwards. I even went as far as to delete Lightburn and reinsta...

Roderick

2024-12-11

43

3

0

The laser stops firing in the meddle of the job but the head doesn’t stops. When that happens, the head eventually stops, moves back and tries to keep engraving where it stops. The problem with that is that when that happens it never restart in the same position, making a really noticeable line along the path. That line is just shifted from the “or...

Jack Wilborn

2024-12-07

53

1

0

On white bath panel mdf but as image this time.sculpfun s9 2000 mm at 75% using jarvis setting and air assist with good ventilation.Edited in gimp and inkscape to remove speckle and firm up lines.

Ethan

2024-11-05

73

2

0

We are setting up a laser machine to carve copper; From the first test, for example, by digging a small square at 0 degrees, a Z-dip angle of approximately 10-15 degrees can be obtained. What parameters should we use for perfect straight line cutting?

55455rml

2024-10-09

43

1

0

My LightBurn program is not fill engraving correctly. Is there a setting that needs to be adjusted to remove the lines left in the engravings?I ran two identical tests back to back. 1 in LightBurn and 1 in XCS and the LightBurn test has lines all throughout and is very dark, whereas the XCS test looks good.LightBurn settings for the box with the ...

Jack Wilborn

2024-09-20

46

2

0

Hello! I recently purchase a new machine, and it’s the first and only machine I have that has an auto-focus and a Z axis that uses a stepper motor. This got me thinking about how I can use this to engrave curved objects without the use of a rotary and to my understanding X-Tool has a machine that can do this.I want to create a height map that uses...

Erdogan

2024-09-13

57

1

0

Hi Folks,i want to cut Parts for a Modell airplane, but there is only small differences between this parts, so i have to engrave some Numbers on them.I marked this Numbers and set them to Layer 02. In cutting options i reduced the Laser Intensity so that he only engrave this parts.But how can i set Lightburn, that its doing First the engraving and ...

Terrelle

2024-09-12

50

1

0

Error 1: When carving fabric, the laser will burn through the materialThe first step in avoiding burning through fabrics when using laser engraving/cutting machines is to understand which fabrics can withstand this process and the temperature they can withstand. Durable fabrics such as denim, canvas, and leather can withstand higher temperatures du...

Ruddy

2024-07-20

44

1

0