1、 Reason for the problemIn the process of laser cutting, if the cutting line is too small or the laser power is too low, there will be a problem of non closure. In addition, if the cutting speed is too fast, this problem is also prone to occur. In addition, the material of laser cutting can also affect the closure of the cutting, and if the materi...

Christian

a day ago

6

0

0

I have a image that i duplicated a few time to make a longer image. I am trying to make this image fit into a circle to make this image round.I can do text fine. But not images. If there is away, please let me know. Thanks.

RTP

01-13

31

8

0

Probably is a dumb question, but is there a simple way if stopping knives on the laser bed from falling inwards when u take honeycomb in and out. Had to replace my knives and holder. Have tried hot gluing tabs on ends where the knives seat but they fall off after a week ot so.

Ruddy

01-15

21

3

0

In the daily operation of laser equipment, the constant emission of light is a common and difficult problem to solve. It not only affects the quality of the product, but may also increase the maintenance cost of the equipment. Faced with the problem of continuous light emission, it is urgent to quickly and accurately diagnose the location of the fa...

Abel

01-10

27

3

3

Possible reasons for the sudden stop of laser cutting1. Insufficient power: Insufficient power of the laser cutting machine may cause a sudden stop during the cutting process. This may be caused by a problem with the laser pump.2. Abnormal optical path: The deformation or contamination of mirrors in the laser optical path may also cause the laser c...

Payson

01-13

22

1

2

1、 The lifespan of the nozzle has expiredThe service life of the laser cutting machine nozzle is limited, usually around 500 hours. If it exceeds the service life, both cutting quality and economic benefits will be affected, and a new nozzle needs to be replaced.2、 Damaged nozzleThe laser cutting machine nozzle is prone to damage, such as nozzle ...

Keegan

01-08

20

1

1

I’ve had a aufero laser 2 with a ortur lu2-10a 24v laser module for about a year now.I was never able to achieve the thickness of cuts that are represented on their site and from other users.While doing some research, i noticed that the lu2-10a was sold as an upgrade and it came with an ouc board to inject another 24v to fire the 2nd 5w diode in th...

Noah

01-03

39

3

0

There are various types of paper materials with different characteristics. For example, commonly used printing materials such as news paper, copperplate paper, and offset printing paper have the characteristics of softness and good ink absorption. Packaging materials such as kraft paper and corrugated paper have the characteristics of tough texture...

Patrick

01-07

37

2

3

Laser cutting technology is widely used in various industrial manufacturing fields due to its high precision and efficiency. However, in order to ensure cutting quality and equipment lifespan, it is necessary to strictly control the operating environment. The following are the key environmental conditions required for laser cutting:1、 Suitable te...

Clarence

01-02

37

2

4

Reasons for deformation of acrylic sheet during laser cuttingAcrylic sheet is a commonly used organic glass, which is widely used in industries such as advertising signs, lighting fixtures, furniture, etc. When laser cutting acrylic sheets, deformation may occur. There are various reasons for the deformation of acrylic sheets: it may be due to exce...

John Trant

2024-12-30

37

2

3

The principle of laser cutting tempered glassLaser cutting is a technology that uses a laser beam to perform thermal processing on materials. Under the irradiation of a laser beam, the surface of tempered glass undergoes instantaneous thermal expansion and cooling, resulting in a stress difference that causes the glass to fracture in the laser beam...

Jamie

2024-12-31

54

2

2

1、 Waterway inspectionThe main reason for abnormal water flow in the laser is due to water blockage or pump failure. Therefore, we first need to check whether the water path of the laser is blocked and whether it is well connected. If there is a blockage in the waterway, it is necessary to clean or replace the local water pipe and exhaust it. If th...

Keegan

01-06

27

0

1

So. I’ve always cut stars with my Ortur Laser Master pro at a speed of 80 and 80 power. Always worked like a charm. Now it’s not cutting thru the basswood. You see a faint line on the backside and that’s it. This is extremely frustrating. Any help would be great.

LWE

2024-12-20

71

3

0

Hi, I have an omtech 80w laser that I’ve had for about 6 months. I’ve been using it a lot more often in the past 2 weeks gearing up for the holidays. I mostly just am curious about maintenance. My machine has suddenly stopped cutting as well: I’ve taken the nozzle apart and cleaned the lens. I’ve cleaned the mirrors as well. Maybe I’m not doing goo...

Carey

2024-12-18

66

4

0

To avoid producing burnt or yellow edges when cutting acrylic sheets, the following methods can be adopted:1. Using high-power laser cutting machines: High power laser cutting machines can quickly and accurately complete cutting tasks, reducing the possibility of producing focal edges during cutting.2. Adjusting the parameters of the laser cutti...

Aaron

2024-12-20

61

0

0