I am looking for the best diode laser between $2000 and $3000. Reliability, usability, support, and functionality are all important.
14 hours ago400NEJE MAX 4 V2 E80， Equipped with Z-axis stepperI am trying to set lightburn so that when I input the material thickness, the z-axis will move to make it in focus.I have set the G54 z offset to -17, which is the focused position on the machine tool.When lightburn runs, it raises the z-axis to the height of the material, placing it in focus.My questi...
2 days ago1610In general, the most direct way to improve processing efficiency is to increase the laser power. When the 60000 watt laser cutting machine was launched, it sparked discussions.Industry experts believe that 60000 watts have the ability to fully replace plasma and flame cutting. Further increasing power does not contribute significantly to cutting e...
15 hours ago900I am getting a buffer message after pressing the start button. How do I clear it?
10-218531Laser cutting of thick steel plates has become a part of daily manufacturing, but laser cutting of thick plates still faces some challenges: energy must penetrate deeply, molten material must be cleanly discharged, and the cutting edge must remain stable over long distances. The following are the main challenges faced by the workshop and mature sol...
4 days ago7021I use a rotating tool, when engraving the inner pattern engraves perfectly. When it goes back to do the outline it is off by a MM or 2 in one area and further in another area on the pattern. I don’t know if it is a setting issue or mechanical issues with my equipment.
3 days ago4910Fiber lasers have the advantages of high precision, efficiency, and versatility, and are widely used in industries such as manufacturing, construction, and packaging. So, what materials can fiber lasers cut?Metal Materials1.Stainless SteelFiber laser cutting excels in processing stainless steel, achieving remarkable cutting depths of up to 0.75 i...
2 days ago1800What is the best method to carve a white effect on glass using a 10W diode? What is the best way to achieve similar results using fast, high-power, low-speed, and low-power?
4 days ago62101. Diagonal cutting of metal pipesDiagonal cutting on metal pipes usually refers to oblique cutting at the edge of the pipe, rather than vertical (90 degree) cutting. Diagonal cutting is usually done at a 45 degree angle, but can also be adjusted to other angles depending on the application. This cutting method can achieve precise connections, espe...
3 days ago7100I am upgrading the 10 watt laser to 40 watts. Both are diode lasers. I carved on maple and hardwood with a 10 watt laser at a speed of 1500 millimeters per minute and a power of 30%, and the effect was very good.When I receive a 40 watt machine, should I maintain the same processing speed per minute and only reduce the power by 1/4? That is to say,...
10-1715320When I use lightburn, making a 10mmx10mm square really draws me a 18mmx18mm square, and I don’t know how to correct it.
10-2075101. Introduction to the Flying Cutting Function of Laser Cutting MachineWhen laser cutting circular or parts with circular inner holes, the cutting method of moving the laser head from one part to another without lifting the head is called flight cutting, which can significantly improve cutting efficiency.2. Different Types of Laser Fly Cutting Fun...
10-217901Can you give me some advice on paper carving? Less power? The main logo is a bit transparent, so we need a 'burnt paper'. Burning it will dirty the paper. Do you have any good ideas?
10-1611520In the metal manufacturing industry, laser cutting has become the default choice. Mastering the process control of laser cutting stainless steel and carbon steel can improve production efficiency and part quality.Choose the right laser family for the jobTwo laser technologies dominate industry use: fiber lasers and CO₂ lasers. For most modern shop...
10-2011700I want to use a metal plate to make a laser bed. What is the size of the hole?
10-1513420
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski