tengo una laser  H1610  la encendi y estaba en chino le cambie el lenguaje a ingles pero ya no estaba calibrada la calibre varias veces pero solo hace cut test cuando le doy star no corta hacia los lados ni hacia abajo y solo me corta en un pedazo y lo demas no corta 

500EA993

3 days ago

53

6

0

dove trovo l'ordine dei layers in vcutworks

8CE9F5B6

3 days ago

42

1

0

There is support for ruida?I am using rdcutist 3.02.20 beta.I have the following problems:- Frame speed is very slow, can't change it.- If I connect parts and load them into RG6563FG. Cutting occurs with a visit (not always)- Focus, axis A can only be controlled in external coordinates. - IMPORTANT: In layer, membrane mode - does not turn on t...

Pavel_TT

2023-08-30

943

25

5

HelloDoes anyone knows, will LightBurn works with Ruida RDC8445S ?I try trial version, and Ruida always in disconnected state, Serial USB/Ethernet IP both not works.PS: RDWorks detect controller by USB and IP (WiFi) - both success 

96DED7E9

05-15

426

4

0

I have a 6442s laser cutter, but I want to install a camera to make precise cuts. Please help with the setup.

9EC1C204

06-25

140

1

0

I have 150W Chinese Laser machine, it is is fitted with Ruida RDC6445S(EC), it is double head laser machine. Head 1 is connected with CN-5 and Head 2 is connected with CN-6.I have issue since I received the machine, Head 1 is firing laser normally, but Head 2 does not fire, I have double checked all the setting in Ruida controller and RDWorks.Whe...

C915A9E2

01-16

996

14

2

Hello, I'm upgrading an oscillating knife cutting machine. The machine had a Galileo controller. The PC used to operate it lost its hard drive. I couldn't configure the software from the backup I had.I purchased a Ruida RDD6616u controller from Wavetopsign on Aliexpress. I asked them for the installation manual and software on several occasions. I ...

Geozapata

06-14

171

4

0

Hello, we have a Ruida controller RDC6563FG for fiber laser cutter. Everything now works fine, except I can't change axis working speed parameters. In the service menu I'm trying to change the parameter Max. work speed, I've entered e.g. 2000 mm/s for axis movements speed. In the USER menus the max manual movement 500mm/s. Above these limits I can'...

Elektron

06-19

145

0

0

Import file failed, what is the reason?

Tim Johnson

05-20

500

5

0

When using the brush function to rotate the Z-axis instead of the U-axis for machining, there is always a gap reset action，

Ruddy

05-20

374

4

0

I am a novice, I tried to use an engraving machine to carve some patterns, but I found that the engraving machine did not carve in the correct direction of the pattern, but in the wrong direction. How can I change the setting? I use RDWorksV8 software

ElenaXavier

05-27

427

2

0

Buen día me pueden ayudar una máquina láser de 90cm x 60cm me sale en la máquina que el tamaño de trabajo es de 38cm x 30cm como puedo ponerla para 90x60

BFF58ACE

05-26

404

2

0

What version of RDworks is supposed to be used with this. I have v8.01.66 and am unable to connect via static wired ethernet or wifi. I can ping both ip's so I know it's online, just no software control via RDworks or lightburn

Colten

05-17

494

6

0

I use a new Monport 80w camera with RDC6442G.However, I hit autofocus in Lightburn or the Z-axis menu and the camera breaks. (This camera does not have a Z-axis limit switch).Can I disable the autofocus feature in the control panel or machine settings?I looked at the Ruida manual but it didn't help much with this problem.

ElenaXavier

05-15

509

1

1

The servo motor only moves in one direction,How should I handle it?

LWE

05-20

458

1

0