chanelink logo
CHANELINK
English

RDWorks， Set the 'Enable Material Feeding' function and do not continue cutting.

Categories:
Ruida
Tags:
528
1
See translation
09-28
I have a new Perfect Laser laser cutting machine, measuring 64 inches x 102 inches, equipped with an automatic feeding platform and a fabric roller at the back end. My fabric pattern is longer than 102 inches. I think we can first cut off the fabric on the countertop, then move the countertop forward to pull more fabric, and finally complete the cutting as needed.
I haven't figured out how to operate it in RDWorks yet. I have set up the 'enable feeding' function, but only moved the table to cut another piece of identical fabric, and did not continue cutting.
C

    • Tory

      09-29
      I figured this out on my own and really the biggest issue was having an older version of RDWorks. I upgraded to the newest version and saw some new options.
 
Options to check:
1. Output tab > Partition for over range checked > i set the distance box above to the size of my table so it does a full feed.
2. User tab > Auxiliary radio button > Feeding Para > Progressive feeding > Yes (Make sure this is set or your table will not feed even if option 1 is done)
        See translation
        Reply
      Relevant recommendations
      Collect
      Report