How to disable auto focus on Ruida 6442G？

ElenaXavier

Categories:

Ruida

Tags:

RDC6442
controller

1.1K

See translation

05-15

I use a new Monport 80w camera with RDC6442G.
However, I hit autofocus in Lightburn or the Z-axis menu and the camera breaks. (This camera does not have a Z-axis limit switch).
Can I disable the autofocus feature in the control panel or machine settings?
I looked at the Ruida manual but it didn't help much with this problem.

blue sea

05-22

Hello! What is the Z-axis of the controller used for? If you don't need to use the autofocus function, you can do without the Z-axis. At the same time, the software user parameters can be selected as the Z-axis lifting mode for IO control.

See translation

Relevant recommendations

Collect

Report

How to disable auto focus on Ruida 6442G？

RDC6332M, when it can follow up, press the auto focus button, the laser head starts to descend, touches the iron plate, and then rises to the reference focus position, and then stops, without lifting

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certai

The cutting head cannot be controlled, and the working indicator of the height adjuster does not flash.

The layer ordering is not valid.

vcutworks