Hello everyone,I know for fill layers there is this option to cut all shapes or to cut individual shapes. I can’t really find such an option for line layers.Here’s the problem:When cutting black acrylic I need about 8 passes with my settings. Now if there are small details on the shape, these passes happen in quick succession, overhe...
2023-03-031.2K10Hello! I have protruding extra lines on my text engrave (on black painted tile with 900 mm/m speed and 70% power):The image shows 3 trial:1. Imported vector shape2. Imported vector (with 90 scan angle)3. Imported raster image of textThe error still occures, and it seems that the position of the extra lines are staying the same. Any ideas what co...
2023-03-0399710I need urgent help, the laser is not cutting perpendicular and when the laser goes to the origin it does not reach the same distance on the right and left sides.We have disarmed and reassembled the laser. We have verified the tensions of the belts on both sides to see if that is the problem, and we do not know what it could be.We need someone to he...
2023-03-031.2K10I am using the latest trial versions of LightBurn (1.3.01) on two different machines. I designed one project on one of them then tried to import on to the other machine which is connected to the xTool Di Pro. Set everything up and attempted to print. The design was basically a 4 in diameter Christmas ornament. All looked good even the preview displ...
2023-03-031.2K10Everything else seams to be working fine with the exception of the home tab. When I press the home button it acts like the extensions are not there. I have checked the setting and uninstalled and reinstalled the xtool. Not sure where to go from here.
2023-03-031.2K10Panasonic MSMF series servo motors, 50W and 100W are all suitable for the same type of drive. The original 50W motor is used, but now the 100W motor is replaced. Is its current, torque and other parameters adaptive? Does the torque monitor output signal including IM terminal correctly reflect the motor torque after replacement?
2023-03-021K10I have recently changed the size of my Ortur LM2 Pro from the stock size to 80mm in the Y direction. I have changed the sizes within Lightburn to reflect the change. After drawing a 400mm x 800mm rectangle within the software, lightburn informs me I am out of the working area every time I try to frame the box. I checked to make sure I was within bo...
2023-03-021.2K10How to select a suitable linear motor module to maintain the stability and efficiency of the equipment.Linear motor selection elements:1. The movement load, the maximum load that can be borne (the safety margin is 80%), and the movement center of gravity deviation.2. Linear motor installation mode: horizontal installation is the best way under the...
2023-03-021.1K00How do I change the settings in Lightburn so it knows the laser is now twice as powerful
2023-03-011.2K10Hello I made a circle and drew a line through it and I tried to edit nodes using “t”. It didn’t do anything. Also, it doesn’t seem to allow me to add nodes to circle shapes.
2023-03-011.3K10Why do I have to flip everything Vertical to get it correct on the surface I am engraving?
2023-03-011.4K20I am looking for help with my Ruida 6445G Controller. The problem is the Z Axis. I have tried multiple options. Trying to get the Z Axis to show me in mm the actual length is not happening. For 100mm on the Controller is only about 4mm movement. I tried using the Auto calculations of Entering this information and the stepper was set at 0.2 which th...
2023-01-301.3K112I noticed that the new version of the software has added the option “Camera is mounted to the laser head”. Regarding this feature, I would like to know the following:1. What specific tasks can this feature help me with?2. What kind of camera do I need to prepare?3. What is the specific usage method of this feature? It would be great if...
2023-02-281.1K10I have Ortur LM2 Machine. I recently replaced the LU 1-4 module with a Comgrow 20w module. The new module is 63mm square and the LU 1-4 is about 40x42mm. I glued a protrusion on to the side of the new module to hit the x-axis homing switch and it works fine. I relocated the y-axis homing switch to the front rail of the Ortur. It works fine if the m...
2023-02-281.3K10Why can't the temperature of water-cooled chiller drop? What are the reasons?Who can give me an answer?
2023-02-2897940
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski