My device control system model is RDC6585G, and I encountered a problem. I pressed the directional keys once on the control panel, and the machine continued to move in the same direction, as if the ke...

• motion system
• RDC6585G
• control system
• laser cutting
• RuiDa

I operated the vibration knife control system RDD6584G for cyclic processing. In cyclic mode, although the equipment was able to repeat the processing path, the feeding mechanism remained inactive and...

• RDD6584G
• control system
• RuiDa

My cutting equipment has a troublesome problem, and the controller model used in conjunction with it is RDV6555G. The position planned by the system does not match the actual operating position of the...

• motion system
• RDV6555G
• control system
• laser cutting
• RuiDa

When I tried to connect RDWorksV8 to the RDC6685U controller, the system was unable to establish communication. I checked the USB and Ethernet connections and confirmed that the interface was not loos...

• USB
• RDWorksV8
• RDC6685U
• control system
• RuiDa

My CO2 cutting machine uses the RDC6585G control system, how to install USB driver? We need detailed steps, thank you!

• USB
• RDC6585G
• control system
• CO₂ laser

I found a headache when using the wireless handheld box of RDC6563FG controller: the buttons occasionally malfunction. Every time the button is pressed, there is no immediate response, and sometimes t...

• RDC6563FG
• control system
• RuiDa

My CO2 laser equipment is paired with the RDC6685U control system, and I encountered a strange problem: when I pressed the reset button on the panel, the system did not return to normal as expected. I...

• RDC6685U
• control system
• laser cutting
• RuiDa

I have a fiber laser device that is paired with the RDC6563FG control system. As I was about to start cutting, the screen displayed a prompt saying "Encoder Error" and the machine emitted a short alar...

• motion system
• coordinate axis
• RDC6563FG
• control system
• RuiDa

Hello everyone! I am adjusting the CO2 visual cutting equipment, and the control system is RDV6445G. During the calibration process, the equipment cannot respond correctly to the set parameters, causi...

• CO₂ visual cutting
• RDV6445G
• control system
• RuiDa

When using the RDV6555G controller for laser cutting, I found that the equipment performs normally in straight line operation, but there are obvious abnormalities when it reaches the position of turni...

• RDV6555G
• control system
• laser cutting
• RuiDa

My device is using Ruida's control system RDC6445GZ-DFM-RD, but I found that the network camera cannot display images. I connected the network camera and confirmed that all hardware connections are wo...

• camera
• CO₂ visual cutting
• RDC6445GZ-DFM-RD
• control system
• RuiDa

My device is equipped with the RDC6555G control system, and I encountered a problem where the counting was incorrect during the eight o'clock edge patrol. Every time the edge patrol was performed, the...

• RDC6555G
• control system
• laser cutting
• RuiDa

My CO2 laser cutting machine uses the RDC8445S control system. Today, I found an abnormality while operating it. Every time the processing program starts, the originally set processing point will auto...

• power supply
• RDC8445S
• control system
• CO₂ laser
• RuiDa

The RDD6616U controller was originally very accurate in cutting position, but after replacing the tool, it suddenly experienced inaccurate cutting. I changed the knife according to the previous proces...

• RDD6616U
• control system
• RuiDa

The control system used for my CO2 visual cutting equipment is RDC6612U-DFM. When I conducted a matching test, I found that the material could not be recognized. Is it a problem with the sensor? Or is...

• camera
• CO₂ visual cutting
• RDC6612U
• control system
• RuiDa