I am using the RDC6555G controller to prepare for processing, but I have found that the laser cannot respond to commands properly. Whether adjusting the power or modifying the path parameters, the las...

• power supply
• RDC6555G
• control system
• laser cutting
• RuiDa

Hello everyone! My device is equipped with the RDC6612U control system, but I found that the cutting result is in the opposite direction of the graphics displayed in the software. Is this a coordinate...

• RDC6612U
• control system
• RuiDa

My device uses the Ruida control system RDC6612U. During the large-format matching test, the target device was not recognized. At the start of the test, the system passed its self-check, but after con...

• RDC6612U
• control system
• RuiDa

My fiber laser cutting machine uses the RDV6563FG control system. Today, while operating, I noticed that the air pressure alarm was constantly flashing on the device screen, the cylinder was acting ab...

• RDV6563FG-NET
• fiber laser
• control system
• RuiDa

My CO2 laser cutting equipment uses the RDC6612U control system, but I found that the Z-axis movement is abnormal. When I long press Z - or Z+for about 4 seconds, the Z-axis keeps moving down or up. W...

• coordinate axis
• RDC6612U
• control system
• CO₂ laser
• RuiDa

Could anyone advise which Ruida controller supports dual Y-axis operation and is compatible with LightBurn? I have a CO2 laser system equipped with two closed-loop encoder motors on the Y-axis, and I'...

• coordinate axis
• LightBurn
• control system
• CO₂ laser
• RuiDa

Hello everyone! I have another question to ask, regarding the RDC8445S control system. I have noticed that the positioning function on the panel is not functioning properly. Every time the positioning...

• RDC8445S
• control system
• CO₂ laser
• RuiDa

My machine is using the RDC6445G control system. Can I confirm if the system supports the electric eye positioning function? What control software is needed?

• RDC6445G
• control system
• RuiDa

My CO2 visual cutting equipment uses the RDV6332M controller. While initializing the equipment, I found that the controller cannot complete the normal calibration process. Can someone help me solve th...

• CO₂ visual cutting
• RDV6332M
• control system
• RuiDa

My CO2 visual cutting encountered recognition bias issues when using the RDV6332M controller. Whenever the system performs automatic recognition, the output results always have certain errors compared...

• CO₂ visual cutting
• RDV6332M
• control system
• RuiDa

Hello everyone! My fiber laser cutting machine uses the RDC6563FG control system. I was operating it normally when the machine protection alarm light came on the control panel, and the system stopped ...

• RDC6563FG
• fiber laser
• control system
• laser cutting
• RuiDa

When using the RDC8445S laser controller, I found that the laser output is very weak and cannot achieve the expected light intensity. Meanwhile, when I tried to adjust the light control function on th...

• RDC8445S
• control system
• CO₂ laser
• RuiDa

When debugging the RDC6585G controller, I found that the cutting head could not be controlled properly and there was no response no matter how it was operated. At the same time, the working indicator ...

• RDC6585G
• control system
• laser cutting
• RuiDa

My CO2 visual cutting machine uses the RDV6332M control system. When I adjust the camera exposure and gain parameters, the operation response is significantly slow. Every time I adjust the parameters,...

• camera
• CO₂ visual cutting
• RDV6332M
• control system
• RuiDa

The control system I am using with my device is RDC6685U, and I encountered an issue while operating the HMI interface. When attempting to open or upload a file, the system pops up a prompt saying 'Fi...

• RDC6685U
• control system
• RuiDa