Everything was normal before. I changed my computer to Windows 10, but I still couldn't connect to the RDC6442G control system. What's the reason?

• RDC6442G
• control system
• RuiDa

I have a CO₂ laser cutting machine equipped with a Ruida RDC8445S controller. After booting up, it gets stuck in the loading interface and cannot start. How to solve this problem?

• RDC8445S
• control system
• RuiDa

Can I install both proximity sensors and mechanical limit switches on each axis of a Ruida RDC 6445S controller? I'd like the proximity sensors to act as the primary reference, with mechanical switche...

• RDC6445S
• laser head
• control system
• RuiDa

Motherboard: RDC6445S, Version: V26.01.16 Fault Description: Y-axis drift — When running a frame cycle, the Y-axis returns to the home position with a consistent offset in the same direction each ti...

• motion system
• coordinate axis
• RDC6445S
• control system
• RuiDa

I'm using an RDC6442S-B(EC) controller, and I've connected my laser to the local network. The network connection itself seems fine, but RDWorks keeps giving me a "communication failed" error. Any idea...

• RDWorksV8
• laser engraving
• control system
• RDC6442S
• RuiDa

I have an RDC6445S controller on a dual-head laser machine with independent offset capability. The distance between the two laser heads is 170mm, and the cutting area is 1600×1000mm. In the manufactur...

• coordinate axis
• RDC6445S
• laser head
• control system
• RuiDa

I have a 1390 laser machine, and it keeps messing up when running programs. Does anyone know how to fix this? Could the controller be faulty? I formatted the files on the controller, and it worked fin...

• control system

Our current setup uses an RDC6442G controller with RDWorksV8 as the host software. I have thoroughly reviewed the full list of manufacturer parameters, but there is no dedicated setting for the homin...

• RDC6442G
• RDWorksV8
• control system
• RuiDa

How do I set the origin on a Ruida 6445C controller and save it so the machine remembers the position? Is there a specific function for this, similar to the G24 or G25 commands used on CNC routers?

• control system
• RuiDa

Hello! I am operating the device and the control system is RUIDA's RDC6563FG. When I was about to start processing, a warning popped up on the system interface, indicating that the status of the follo...

• RDC6563FG
• control system
• RuiDa

The control system used for my device is RDC6445G. Today, I found that the panel loading was abnormal and I was unable to enter the main interface normally. There is no cursor flashing on the screen, ...

• RDC6445G
• control system
• laser cutting
• RuiDa

My machine uses the RDC6445G controller. During the initial reset of the X-axis, everything was normal. However, after triggering the limit for the second time, the speed was very slow and the reset a...

• coordinate axis
• RDC6445G
• control system
• RuiDa

The control system used for my CO2 laser cutting equipment is RDC6445G. I noticed slight ghosting at the edges of the image during the scanning process, and the cutting trajectory was no longer clear ...

• RDC6445G
• control system
• CO₂ laser
• laser cutting
• RuiDa