Laser engraving on wood is not only about engraving images, but also endowing natural wood with artistic life. Mastering the essence of it can create works that even experienced craftsmen can admire.What Wood Works Best for Laser Engraving?Not all wood is created equal, my friends! Selecting the right type of wood is crucial. Woods like maple, c...
an hour ago300Can Lasergrbl be used for carving and cutting in the same project?My machine is a 10W laser
10-2823740Infrared ultrafast lasers offer the highest power and pulse energy for maximum throughput in applications that require picosecond and femtosecond pulses. These lasers are the ideal choice for a variety of applications such as precision micromachining, fine tube cutting, and foil cutting.Designed for robust and reliable performance in 24/7 industri...
08-2868900The HP-Series high-performance CW products have a power range of 300-40000W and are characterized by high intelligence, stability, and safety. They not only meet higher international safety standards, but also have excellent processing efficiency in industrial processing. This series of products can be customized for global customers, including cus...
08-1261400I have an Atomstack A5 Pro equipped with a 5W laser. The problem I encountered is that when carving or cutting, the laser stops for a few milliseconds and the carving leaves burnt spots at the stop. Can you help me? What happened?
03-2482540Having a super hard time getting this image engraved on black slate. I have tried everything. Tracing Image, Removing background, Inverting, Negative etc.and no matter what I do I can not get the face to engrave. It alway engraves the eyes and the lips but not the reverse.
03-251K20Hello friends, I have a problem with my Laser Atomstack S20Pro 20w - Blue laser. The laser does not engrave at power up to 0-20% and also does not engrave at speeds above 3000mm/m.-20000mm/m. For a better understanding, I created an engraving test. Birch plywood MDF 4mm is used. The task is completed normally. It does not report any errors. I am us...
03-2087840Please see image. The text engraved in the right direction but was mirrored.
03-1882620Wood is one of the most common processing materials for laser engraving. Laser engraving wood has the advantages of fine carving effect, accurate positioning, and no mechanical wear. With the help of intelligent control system, the processing plan can be flexibly adjusted to quickly complete personalized design. Therefore, it has a wide range of ap...
02-2883300Please tell me how to fix this. I can’t even do the camera calibration. Thank you!
2024-12-211.1K30Reasons for the problem of laser engraving not being roundDuring laser engraving, there may be issues with roundness. This is mainly caused by the following reasons:1. Unreasonable device parameter settings: If the device parameters are inaccurate or unbalanced, the accuracy and quality of the carved object will be affected, resulting in irregular ...
2024-12-231.2K00have a Creality Falcon2 22 watt laser. I am running the most current version of a licensed version of Lightburn on a Dell XPS with Windows 11. Everything was working fine yesterday but when I went to run a file from yesterday and a new one from today both frame and engrave upside down/backwards. I even went as far as to delete Lightburn and reinsta...
2024-12-111K30The laser stops firing in the meddle of the job but the head doesn’t stops. When that happens, the head eventually stops, moves back and tries to keep engraving where it stops. The problem with that is that when that happens it never restart in the same position, making a really noticeable line along the path. That line is just shifted from the “or...
2024-12-0788210On white bath panel mdf but as image this time.sculpfun s9 2000 mm at 75% using jarvis setting and air assist with good ventilation.Edited in gimp and inkscape to remove speckle and firm up lines.
2024-11-051K20We are setting up a laser machine to carve copper; From the first test, for example, by digging a small square at 0 degrees, a Z-dip angle of approximately 10-15 degrees can be obtained. What parameters should we use for perfect straight line cutting?
2024-10-0975710
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski