Laser chiller is a kind of equipment used to cool the laser, in actual operation, there are often some wrong operations, these wrong operations may cause damage to the laser chiller, and may even cause safety accidents. Let's take a look at several wrong operations in the actual operation of the laser chiller.1. Before the laser chiller is turned...

Kevin

2023-09-01

457

1

0

Bonjour, je cherche comment graver un motif sur une pièce déjà découpée. J’ai téléchargé un motif etje voudrais graver uniquement sur les pièces présentent sur mon plateau, sans que ça dépasse.J’arrive à superposer le motif à ma pièc...

Robert Evans

2023-08-31

329

1

0

When I select the ‘square’ option then put text inside, I only get one cut/layer line, so it all gets cut out or burned. I want to make and cut patches without cutting the Lester’s out inside of it

Henry

2023-08-31

397

1

0

I have a new issue with my Xtool D1 Pro 20W, I have the fire button set to 1% which I have used for over a year with no issues. However now when I try and frame the laser is burning into the workpiece.I have checked and $$30 is set correctly to 1000 and $$32 is set to 1I have re installed the Xtool profile as well as Lightburn. I have also rolled b...

Jamie

2023-08-31

420

1

0

Why does this happen in precision?

Vasili

2023-08-30

418

1

0

I have two problems . . .1. I have been trying to use pointer offset in the device settings but Lightburn generates an error on Start if I enter a negative value in the Y axis setting. This happens even if the laser head is placed well within the work area. I’ve seen this done in a YouTube video using Lightburn and my same make/model ...

Nugent

2023-08-30

411

1

0

HiAre there more detailed tutorials for using the line tool? I can’t find any…I drew myself a makers mark. I wish to thicken the lines. How do I do that?

Christian

2023-08-30

435

1

0

Hello all. I am a total novice and newbie to the world of laser cutters/engraversI have just purchased the Atomstack P7 M40. Seems a great little unit.My question is this. If I home the unit, its fine. But as soon as I try to frame a job the laser mount (not sure what the technical name for this is) seems to try and come to far back and then the ...

Patrick

2023-08-30

472

1

0

Does anyone know why I would be getting this random line going through lettering. Laser head is cleaned and it only does it with font. Images are all fine. Ideas?

jessie

2023-08-30

341

1

0

Hello,I am currently building a new CNC Machine (primary milling) which is using PlanetCNC. I want to have a ‘powerfull’ diode laser on the Z Tower of the machine.Can I use Lightburn for the Laser tasks on my milling machine with the PlanetCNC controller?Since I want to order a diode Laser can yo give me any advice for a module with go...

roy

2023-08-30

339

1

0

If object dia is 96mm do you set the steps per rotation 96000. Using a chuck rotary? When trying to put a 20mmx20mm square on a tumbler it comes out 20mm tall but real thin, not 20mm thick.

Patrick

2023-08-23

359

1

0

Hey Gang,All of a sudden, my 10w Creality CR Laser Falcon SE is not burning properly. It’s “missing” areas of the burn. I’ve made no changes in Lightburn but as you can see from the image example and the screenshot from LB, it’s missing. I’ve tightened the belts thinking that could be the problem. Any other ideas...

Henry

2023-08-24

325

1

0

Laser chiller is a common refrigeration equipment in industrial manufacturing, which has high temperature control precision and wide application fields. The temperature of the laser chiller system has a normal temperature range, and the temperature beyond this range is abnormal, these anomalies may be caused by the fault, and may also be improperly...

Liam

2023-08-23

462

1

1

If I try to start the laser He always Go Up first and than start .So he runs against the switch and lost the steps he need. look pic.Can Anyone Help me whit this

John Trant

2023-08-24

274

1

0

Good evening. So currently I have 2 Co2 lasers (different wattage/purpose machines), 5W UV Laser, and 50W JPT Fiber Laser Trying to figure out a way to combine all libraries into one, however have them categorized. So for example, I have a header value of Fiber, UV, Co2 and under each header then I can enter my cut/engrave settings for each of the ...

Robert Evans

2023-08-24

328

1

1