Hey,ich hab seitdem ich meinen LM3 habe folgendes Problem, das der Laser sporadisch nicht durchschneidet. Bis heute dacht ich es liegt am Holz, an der Struktur oder an der Verleimung.Nun bin ich mir aber nicht sicher ob es vielleicht doch am Laser oder an irgendwelchen Einstellungen zu tun hat.Ich schneide seid Tagen schon das gleiche Muster aus un...
2023-11-0823510HiIm struggling to align laser beam with my new laser tube. each time I successfully align it Im having to do it again after 5 minutes. Any help is much appreciated.for OMTECH 60wThank you
2023-11-0821910Is it possible to speed up an engraving or change the number of passes while it is engraving? Or can that only be done before the engraving starts?
2023-11-0722410I cannot get an image from my new camera that I purchased form YoraHome. Black image only.
2023-11-0727710Does anyone have any idea why when I’m trying to cut the second pass it goes off the line?Please look at the attached image:
2023-11-0721910Is it possible to create a macro switch that can be turned on ans assign the switch to park the laser head up and out of the way of where it just finished?This is related to a previous post about me making small 50x50mm round engravings and swapping new ones in.This would be useful for a LOT of things I do.I know with my 3d printer / CURA i can add...
2023-11-0621110I have a 100watt mopa Galvo and its not filling all shapes individually on some designs I noticed this when I traced an image in lightburn and set it to fill individually It still would fill the entire thing at once, I have already tried ungrouping the shapes and still no luck. On version 1.4.03 running on a M1 Max.
2023-11-0621610Hi everyone, I have short question to those who know better than me: Is the light coming out of a laser engraver enclosure safe?What I mean exactly: There are ports for air to come in that can be opened up on the sides of the enclosure, where then blue light comes out from the diode laser. But it is by no means direct. Would that blue light still ...
2023-11-0625910When I frame a project, the laser comes on frames then shuts off. I’m guessing it’s a setting, but on black or dark projects it leaves a line.Thanks in advance.
2023-11-0322010anyone know where I can find the rear minus front command
2023-11-0320920It works fine with Laser GRBL but not with LB. Can’t find the Com Port. Again, Com 3 on GRBL and no issue - instant connection.
2023-11-0322310can anyone tell me how to change the start point of a cut on a dxf file imported to lightburn on the laser?
2023-11-0324110Hello.Is there an option to show/hide the icon of the “Set Laser Position”?Everyhting is fine (sort of say), but when I click in the workspace does not show the small icon where the laser is located.
2023-11-0222130Lightburn is not recognizing the console, although I´ve tried several times and several drivers…So my next step in Lightburn, was to install the console manually…One config is a GRBL normal, and the other is a GRBL M3 type…I made 2 engravisngs…One normal, and one M3 type…Same config, even turning on constant...
2023-11-0223110I was working on a simple tutorial to help someone that had 3 elements they wanted to engrave and then have a contoured cut line but using offset instead created 3 separate lines because the items were too far apart.Well I have a fix for this but just keep making the offset larger until it does join then select the offset and offset this inward un...
2023-11-0225310
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski