I have a laser with the RDC6442G controller that is less than a year old. Everything has worked fine until a week ago when the left arrow would move the gantry to the left and backwards at the same time. The back arrow also moves it back and to the left at the same time. Right and front arrows work correctly. The Z/U button also occasionally moves ...
2023-06-2762310Hi all,I've just completed building a 600mm x 400mm 90w machine with an RDC6445G controller.I noticed (in the manual) that a tri-color warning lamp can be connected to the controller but I'm unsure how to do this. I did see a video on YouTube where a single lamp was connected to the 'Status' pin but I would like a three-color lamp (...
2023-06-0751710Hi, I have been trying to engrave the Text on wood using milling cutter, however when I import the file from Illustrator to Vcut works it changes the image and cuts only boarder lines as a cut out.How can i engrave the entire world instead of making it a cut out. Can any one guide ?Regards
2023-06-0569110The cutting drawing is not closed, and there is no problem with the drawing. How to solve this problem?
2023-01-0963120I am looking for help with my Ruida 6445G Controller. The problem is the Z Axis. I have tried multiple options. Trying to get the Z Axis to show me in mm the actual length is not happening. For 100mm on the Controller is only about 4mm movement. I tried using the Auto calculations of Entering this information and the stepper was set at 0.2 which th...
2023-01-30755112When RDC6563F is used, XY axis does not move manually.
2023-01-0380530I power laser on and it only displays connecting to controller. I have disconnected the him from the controller and nothing homes. I have led 15 and 12 lit up with eithernet discounted. Homing switches work chiller input works and all drives are good no faults. Any ideas?
2023-02-0268520Can sombody help me whit software Vcutwork ?After changing the mainboard i can't put the right parameters back before.I don't have backup .?The milling cutter and the knievs don't take the rise that i set from keyboard and they allways get up in the hom position to make the jump and i loos too much time in this mode .I need to know how can...
2023-02-0861621Once powered on, the cutting head will always move upward, and will not stop. Switch to the manual state, and the motor can be controlled to move, and then switch to the automatic mode, and always move upward.
2023-01-1069710The cutting head does not lift up and down, but the motor has sound.
2023-01-1049910After normal connection, press the auto-focus button, and the cutting head will move upward all the time.
2023-01-1059610After cutting, it is found that the graphics in the software and the actual graphics are reversed from left to right or up to down.
2023-01-09654106563F moves manually on the panel according to Z-axis, and the cutting head does not move.
2023-01-0568320The processing serial number arrangement is invalid.
2023-01-0556910Just installed ruida 6442 and control is always reseting 10000mm x 10000mm y and I can't figure it out for the life of me
2022-12-2872310
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski
