I have an Atomstack A24 Ultra 24v diode laser using GLBR-LPC controller and running Lightburn version 1.7.06 on Windows 10 laptop. This configuration works fine with no issues. My working area is 365mm x 305mm (X and Y).I have just purchased an Atomstack R5 Conveyor Feeder to extend my work height from 305mm to 800mm on the Y axis. So far, my only ...
3 days ago700Hi,The soft cover for my Creality Falcon 2 22W contains a fan. However, the fandoes not seem to work. I’ve had it (USB) plugged into the wall and the PC.How can I get it to work or even test it? Your help is greatly appreciated.
3 days ago600The laser welding head is connected to the laser output end using a fiber coupler, and the optical path is deflected, converged, and shaped through internal optical components. Meanwhile, by establishing a connection between the motion actuator and the product coordinate system, the accuracy of the welding position is ensured. According to differen...
3 days ago800Why is it necessary to clean the laser cutting headLaser cutting head is an important component of laser cutting machine. After a period of use, it will gradually lose its sharpness due to the high temperature generated during cutting and the influence of impurities encountered during cutting, seriously affecting its cutting effect. Therefore, we n...
3 days ago1000Hello friends, I have a problem with my Laser Atomstack S20Pro 20w - Blue laser. The laser does not engrave at power up to 0-20% and also does not engrave at speeds above 3000mm/m.-20000mm/m. For a better understanding, I created an engraving test. Birch plywood MDF 4mm is used. The task is completed normally. It does not report any errors. I am us...
4 days ago1010In modern automation control systems, servo cables serve as key components connecting servo drives and servo motors, and their performance stability and reliability are crucial. However, in practical applications, the problem of poor contact of servo cable joints often occurs, which not only affects the normal operation of the equipment, but may al...
4 days ago911As an important equipment in modern industry, the stability of the bevel fiber laser cutting machine is directly related to production efficiency and product quality. In order to improve the operational stability of the device, it is necessary to start from multiple aspects, and the following are some key measures.1、 Accurately adjust process par...
4 days ago900longer b1 question. sometimes, after a job… the laser goes to the position which i requested it goto… and the lb status line shows 99% complete, and looks like it is working on something. I have had to click on the stop button before to get the software to complete whatever task it was working on and allow me to do my next task. is this normal?
4 days ago1310The motion control card is currently one of the mainstream solutions for laser control. As a PC based upper control unit, the motion control card can accurately control the position, speed, acceleration and other parameters of the motion axis. Based on the trajectory parameters set by the user, it can accurately calculate the motion trajectory and ...
4 days ago900Price of enamel reactorMany people think that the price of enamel reactor is relatively expensive.In fact,this is not the case at all.The price of reaction kettle is still very cheap.Even now many enterprises in the market are constantly reducing the price of equipment due to fierce competition in order to get the attention of consumers.Therefore,t...
03-191801Glass lined reactor manufacturerGlass lined reactor manufacturer bring you wonderful content.Welcome to continue reading!The glass lined reactor may be damaged due to improper operation or environmental reasons during use.At this time,we need to repair it in time so that the machine can be used normally.What are the repair methods?Please see the in...
03-191601Programmable CNC Bending MachineWe are a professional Programmable CNC bending machine manufacturer with over 10 years of industry experience. Today, we would like to introduce to you: Manual programming refers to the entire process from part drawing analysis to program verification being completed manually. Programmers need to be familiar w...
03-191512Price of mechanical punch pressMechanical punch machines, as important equipment for metal processing and forming, have a wide range of applications in the market. Its sales situation is influenced by multiple factors such as market demand, technological progress, and price competition.1. Product FeaturesMechanical punch presses typically have the ...
03-191911What settings may cause dots to appear at the intersections of lines?It looks as if the laser is pausing at each corner. Note: The vertical line on left is 3mm in length and the horizontal lines are 8mm in length.DSP AWC708 ControllerLightBurn 1.7.07
03-191820In many fields such as laser processing, 3D printing, and scientific research experiments, laser smoke purifiers play a crucial role. They can effectively remove harmful smoke and particles generated during laser operations, protecting the working environment and the physical and mental health of operators. However, to ensure the efficient operatio...
03-191400
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski