Do I need a licence to run the Ruida Software, RDUnionLaserV2.0? 

Gerhard

2 days ago

98

6

0

Hello, Can someone support me with connect alarm info from servo driver to ruida main board ? It should works as  below:If some error exist on driver, then I have info on operation panel, and working is paused 

2E66B829

2 days ago

77

2

0

Will the water temperature flowing through the laser tube have a direct impact on the laser ablation efficiency? I know the water temperature should not exceed 70 degrees Fahrenheit, but is there a limit to the water temperature?

Smith

a day ago

64

0

0

I’m new to laser cutting veneer. I still haven’t figured out how to separate the complete line drawing into parts for cutting. I’m working with a line drawing of a flower with 5 petal parts and a center - two leaves with two parts each and a stem with two parts.

Simon

3 days ago

89

2

0

I got my tumbler / rotary stuff dialed in, and I thought let’s burn a piece of bass wood.Any suggestions on why I’m getting rectangles instead of squares?

Kevin

2 days ago

77

1

0

What Factors Affect Laser Welding Machine Prices?The price of laser welding machines is influenced by multiple factors. Among them, laser power, brand differences, and customized needs will significantly affect the final pricing. Generally speaking, the higher the laser power, the higher the equipment price. For example, high-power models such as 3...

Patrick

a day ago

60

0

0

I recently bought a dual beam co2 laser with a camera. The machine has a ruida RDC6685U controller installed and the software is RDVisionWorks. The way it's supposed to work is the camera takes a picture of the printed fabric, identifies the outline and then cuts. After the cut, it moves on the U-Axis and repeats the action until the job is complet...

GS1wx4zV

2024-03-12

1.1K

6

0

Laser engraving on wood is not only about engraving images, but also endowing natural wood with artistic life. Mastering the essence of it can create works that even experienced craftsmen can admire.What Wood Works Best for Laser Engraving?Not all wood is created equal, my friends! Selecting the right type of wood is crucial. Woods like maple, c...

roy

2 days ago

85

0

0

Using my p3 laser and i get to about 75% complete of a project and my laser stops firing but continues to run program. Any help is appreciated.

Vasili

11-18

113

2

0

I need some help, see pic. I want to engrave this image just like it is but how do I do that with part of 1 image on top of the other? I want the gate to look like it’s in front of the house with a little distinction between the two while still being able to see the house parts between the open parts of the gate.

jessie

4 days ago

94

1

0

RDC6563FG Lasercontroller mit dem Maxphotonics MFSC 1500X Laser.Software RDCutist 3.0,Mein Problem nach schneiden läuft die x/y ganz langsam weiter erst nach Stop  steht die Maschiene.Wie kann ich die Anstechzeit erhöhen , bei dünem Blech kein Problem .Aber bei dickem Blech schneidet die Maschiene schon obwohl sie noch nicht durch das Material i...

aO5ZCpeb

11-17

165

5

0

1、 Metal types suitable for laser markingAlthough laser marking has a wide range of applications, it is not suitable for all metals. On materials such as stainless steel, aluminum, brass, copper, and titanium, they are often selected as ideal targets for marking due to their good laser response. However, the interaction between each metal and lase...

Williams

3 days ago

73

0

0

Does anyone know how to cut at a 45 ° angle? I am using the Thunder Nova 63 laser cutting machine. I would like to know if there are any ways to achieve cutting angles on materials such as wood and acrylic?

Jamie

11-14

174

3

0

Choosing between pulse laser cleaning and continuous wave (CW) laser cleaning is a key challenge when selecting laser cleaning equipment. These two technologies each have their own advantages and are suitable for different scenarios. To assist you in making informed decisions, this guide will provide a detailed analysis of the core differences, adv...

Patrick

11-19

99

0

0

I have the latest update on windows and lightburn (v2.0.04). Ran the “Calibrate Camera Lens” with no issues but running the “Calibrate Camera Alignment” I get a dark image after pressing “Capture Image”. I’ve unplugged camera, restarted lightburn, restarted computer with no help.

Henry

11-17

117

1

0