1. The so-called "loop" of the position loop is not what we call a PID closed-loop, and the position cannot be adjusted through a regulator like the speed and current magnitude;2. The position of the motor rotor and moving body can be detected using either an encoder or a position detection method, so servos have input interfaces for direct posit...
2024-05-228320Siemens has innovatively upgraded its highly favored SINAMICS S210 servo drive system, further expanding its application range by adopting a new hardware architecture and next-generation V6 software.This servo drive system is suitable for high dynamic applications with a power range of 50W to 7kW, and can better support industry applications such...
2024-02-038510With more and more technologies widely applied in industrial automation, we have entered the era of Industry 4.0. New technologies continue to emerge, empowering artificial intelligence and machine learning, data analysis, industrial networks, network security, and functional security. However, most industrial automation, as the core of all other t...
2024-01-3116910ECI and PCI advantages1. ECI:1) No need to rely on industrial computers, which can reduce the configuration requirements of PCs and reduce the volume of industrial computers;2) No need to install PCI drivers, one network cable solves the problem;3) Regardless of the number of axes, all products call a set of API functions;4) No need for PCI adapte...
2024-01-2915220I have come into contact with many torque control machines and always think that torque control is more useful than torque clutch, with average accuracy; The servo accuracy is good, the response is fast, but it may not be applicable to all, and the price is high; Poor air pressure accuracy; Hydraulic complexity, difficult to control.
2024-01-2911310May I ask if you are planning to use a laser displacement sensor to scan the parts, and then use a servo motor with a grinding wheel to follow the contour of the parts for polishing? How should you configure the hardware?
2023-12-269210From the point of view of concern, motor control (here refers to servo motors) is mainly concerned with controlling one or more parameters in the rotation, speed, and position of a single motor to reach a given value. The main focus of motion control is to coordinate multiple motors to complete the specified motion (synthetic trajectory, synthetic ...
2023-07-2028210I want to make a torque machine with the plc and servo motor, see others do is to use the integrated machine zg3-8 0yt-7, this can go communication? Or does it use pulses to control the torque?
2023-04-2420910We all know the three-ring, in which the current ring is regulated by the driver itself, we need to do the work is to adjust the outside speed ring and position ring, which is the classic PID controlWhen we carry out positioning control, the speed curve and displacement curve will be planned in advance, and then the PLC is sent to the servo driver ...
2023-04-2425410The closed-loop controlled frequency converter can achieve closed-loop position control in the stopped state through encoder detection, locking the servo motor shaft at a fixed angle. This function is called servo motor locking or zero servo function.
2023-03-1819710One equipment on the production line and one servo are transplanted to the normal position. It has been determined that there is no problem with the mechanism. It should be an interference problem. The servo is Panasonic servo motor. I don't know how to eliminate this problem?
2023-03-1324010The servo motor is used with the reducer, such as the planetary reducer. The reducer has a reduction ratio. The servo motor outputs the specified speed. After the reducer decelerates and increases the torque, will the speed accuracy of the output shaft of the reducer be improved? Or does the reducer affect the speed accuracy of the servo motor? Is ...
2023-03-0430910Panasonic MSMF series servo motors, 50W and 100W are all suitable for the same type of drive. The original 50W motor is used, but now the 100W motor is replaced. Is its current, torque and other parameters adaptive? Does the torque monitor output signal including IM terminal correctly reflect the motor torque after replacement?
2023-03-0221510Throughout the development history of the laser control system industry, domestic substitution is an important driving factor. In terms of servo control system, in the field of medium and low power, domestic enterprises led by Bacchus Electronics have reached the international leading technical level, and Bacchus Electronics, Weihong and Aosendico ...
2022-11-2818501
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski