After a period of study of 51 single chip computer, I made a laser engraving machine and laser cutting machine by referring to the information of the previous generation and using the waste optical drive. Here is my production process. I want to share with you the successful new one. Thank you again for the information of the previous generation&n...
2023-02-2441423I’m running a lengthy cut-thru project with the equivalent of an Atomstack LaserStorm S10 (PerGear branded). BTFW, by lengthy, I mean lengthy. I’ve already had to replace the power supply and upgrade the amperage. I’m about 2/3 of the way thru the project, literally weeks down the road (I have cooperating roommates monitoring whil...
2023-02-2342620Device Settings,‘Work Size’, 250w, 200h,Origin Bottom Left,Job Origin Top Left.Start from current position.‘Trace the cut boundary’ causes the y axis to go max up, and violent vibration, like belt skipping or trying to move to a location outside the work space.‘Trace a rubber band’ Traces the perimeter of object ...
2023-02-2350610I can set the laser to the home position with no problem but when I try to use the “Set Laser Position” icon to line up the laser on the bed, it does not go to the same position that is on the screen workspace. It seems to go in the right direction on the bed, but not to the spot where it’s showing on the workspace in Lightburn. H...
2023-02-2347210Done a new build with Annoy tools Board double Y axis (newish to game) The build is A1 all brand new The X Axis just makes a little noise doesn’t do anything all the cables are okay and swapped motors around all A1 Any help…
2023-02-2334310Trying to use Lightburn to change an image. So Import the Jpg, size it, then right click and choose Adjust Image. It opens up and now I can make adjustments such as Jarvis or Threshold or Gamma etc. etc. etc. All good so far. Click OK and it returns to the workspace, and doesn’t save anything. I’ve figured a Klugy way around it, but why...
2023-02-2334130Hello everyone. I have an Ortur aufero laser 2 and a lightburn license. When engraving photos, the laser stops after a while and nothing can be done at various times. There is no such problem when cutting. I tried changing the settings and nothing helps. I change the settings according to the ortur manufacturer’s instructions. Even though the...
2023-02-2328620For pulsed IR laser rust removal systems i've seen various power ratings, such as 2kW.Is this 2kW the peak pulsed power? or 2kW continuous power with a peak pulse power in the hundreds or thousands of kW?
2023-02-2331010Most of the designs I've seen for a KTP crystal mount allow X / Y angle along with rotation. I've built such a mount and in my testing I didn't find the X / Y angles to make much of a difference. Do they under certain circumstances? Crystals I've seen are cut to work parallel to the optical axis. Is flexibility here just done to account for imperfe...
2023-02-2342030Yes. It can be done, and it’s RELATIVELY straightforward as far as reprocessing goes, but it’s rarely worth the effort and expense involved; in many cases it’s both easier and less expensive to just pop in a new tube. For the most part, tubes on CO2 lasers are regarded as a consumable.
2023-02-2332810I’m trying to find the right settings to engrave this image on my diode laser with the latest version of lightburn.Before switching to light burn to control my diode laser, I was using a very generic laser control software called “laser engrave”.With that software, I was able to get precisely what I was looking for as shown on th...
2023-02-2249220I fairly new to Lightburn and I’m looking for help to cut a 4 sided polygon with one corner having an angle of 84.5 degrees. 2 corners @ 90 degress and the last corner @ 95.5. Not sure how to accomlish this in Lightburn.
2023-02-2240810Ho una corona cilindrica a denti dritti in materiale plastico "penso fibro-rinforzato" che vorrei duplicare con la mia fresatrice hobbistica proxxon ff230.I dati che sono riuscito a ottenere dalla corona sono:Denti: T 102Diametro esterno: mm 41.30 in 16.26P 64Angolo di pressione stimato con un ingrandimento a 30x sembra di 20° ma è talme...
2023-02-2234910Buongiorno a tutti ho un problema con la mia 3018. Sto eseguendo delle prove di incisione laser su lamellare da 10mm. Facendo vari tentativi ho casualmente trovato il risultato che cercavo ma non mi sono appuntato i parametri di lightburn. Posto la foto del risultato, che è nitido senza segno e marrone chiaro , invece dei vari tentativi in c...
2023-02-2238020i am a total newbie to this i have a xtool d1pro 5w. i have just installed lightburn and the origin is in the back left corner of the machine and i cannot get it to move to the front left corner of the machine and the y axis is going in the wrong direction and so are the move buttons. x positive to the right, y positive to me should be going away f...
2023-02-2248910
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski