I was trying to do multiple sections of tracings on an image that doesn’t trace well, and everything was going good. Something caused the trace that I was working on to move to the back of the image. Now when I trace anything it moves to the back. I have tried all the arrange > move options, the trace is a line and not a fill and nothing works.

Nugent

2 hours ago

1

0

0

Dear Users,To further strengthen our professional service capabilities and build a more efficient and trustworthy platform for communication and resource integration in the laser industry, Chanelink has undergone a comprehensive refinement. The fully upgraded version will officially launch on December 15 (UTC+8), and we warmly invite you to experi...

CL001

3 days ago

257

3

1

So I’ll start an engraving and the first couple inches goes where I planned then it jogs over several inches to the right, engraves a couple more inches, then jogs back over in line with the bottom. Not sure if a lightburn issue or not but haven’t been having the problem until now.Running Lightburn 2.0.05 on a Monport Onyx-R 55w CO2 laser.

Vasili

a day ago

52

1

0

Even experienced welders find it difficult to completely avoid burn through issues when using traditional processes such as TIG or MIG. This article will explore how we can effectively address this welding challenge by introducing laser welding technology.1. How to weld without burning through?Too much heat, too fast—this is the classic way welder...

Williams

3 hours ago

1

0

0

I have brought a few of the TEMU coaster blanks.. Both the rounds and the squares. I am having some problems when I do fills in that the edge tends to bleed resin, which makes cleanup and sanding almost impossible.These are raw pine wood.Does anyone have any suggestions?? Does the wood need drying,treatment etc.

Henry

12-03

408

4

0

Welding, as a core process, is widely used in many key fields such as automotive, aerospace, manufacturing, and construction industries. The rise of handheld laser welding technology has provided unprecedented convenience for achieving stable and high-quality welds. Next, we will focus on analyzing the identification methods between high-quality an...

roy

a day ago

55

0

0

I am a beginner in LightBurn, how can I save drawings in LightBurn? I used to be accustomed to saving the completed cutting drawings, which I could then load and continue using the remaining space for new cutting.

Simon

12-05

333

1

0

Benutze RDC6563FG Lasercontroller mit Software RDCutist 3.0,gibt es hier für vielleicht eine Verschachtel Software ( Nestig )setzte DXF Dateien ein. Grüße Matthias

aO5ZCpeb

11-30

512

9

0

What is the best method for cutting laminated metal plates?When cutting laminated metal plates, it is recommended to use a fiber laser with nitrogen assistance and a dedicated laser grade protective film to achieve the best results. At the same time, the cutting speed and heat input should be balanced according to the finely adjusted process param...

Clarence

12-02

248

2

1

Hi, Is there anywhere in the lasergrbl program that shows the current line being burned or the line that was being burned when an error occurs? I have had a few times where the laser has stopped and I can restart the project at a certain line, but its a guessing game to figure out where to start the laser where it left off? Thank you!

Terrelle

12-04

410

1

0

1. Laser sourceThe laser source is the "heart" of the laser cutting machine, and its performance directly determines the power level, long-term stability, and final cutting ability of the entire machine.Fiber laser: the mainstream choice for industrial applications, with high photoelectric conversion efficiency, suitable for metal cutting.Carbon di...

Gilbert

12-05

325

0

0

I am looking for a little help on how to clear up my engraving. It isn't the image that is at fault. I am pretty sure it is a setting somewhere. Thank you for any assistance you can give! I assure you, it's VERY much appreciated!

5E15376F

12-04

365

1

0

Our Makerspace has a “Red and Black” CO2 Laser which currently displays patterns horizontally flipped on the LCD, but cuts correctly. This is a new behavior, and I am trying to figure out the root cause and repair it.

Tory

12-02

268

2

0

The traditional processing methods for countersunk holes mainly include drilling and stamping. Drilling relies on experienced operators, and when processing conical countersunk holes, secondary processing is usually required on the basis of completing flat bottomed countersunk holes. Stamping requires the use of universal punching machines or CNC p...

Payson

12-04

406

0

0

I’ve just set up my laser machine.I have my homming set up at front left of machine bed. But can you set a auto park possion at the top left after it’s finish homming

jessie

12-01

292

3

0