Reasons for poor laser weldingPoor laser welding can be caused by various reasons, such as improper welding parameter settings, poor quality of welding materials, improper preparation of welding surfaces, and malfunction of welding equipment.1. Improper setting of welding parametersWhen the parameters such as laser power, focal length, and focal ...

Cyril

02-14

409

0

0

Cuts/Layers.When I slect “fill” it does not fill the text or object in the work area? What am I missing?

AL.TAL

02-12

391

2

0

Switched from rollers to chuck and now the image/texts are reversed. Did I miss a setting somewhere. Are they different from using the rollers to the chuck? Xtool D1 Pro 20W with RA2 Rotary. Any advice appreciated.

James

02-10

419

4

0

Reasons for black welding in laser weldingThe blackening of laser welding is generally caused by the following reasons:1. Gas pollution: During laser welding, impurities in the gas may cause incomplete melting, resulting in blackening of the weld surface.2. Insufficient energy: If the energy of the laser is insufficient, the temperature of the wel...

Payson

02-13

394

0

1

What would suddenly cause the camera to be about 2 inches off in the Y axis? I was using the camera for a few cuts to salvage some scrap and it was working perfectly as usual then from one set up to the next, it framed two inches higher in the Y axis than showed in the picture, There were no bumps or shocks to the lid or cabinet, the alignment was ...

Iron Man

02-11

385

2

0

I am just learning and new, still on the trial package. In the lightburn program and I am wondering why the mirror button doesn’t show up to use anywhere, not on the tool bar and not down the Arrange section. Maybe I have to turn it on but have no idea and have search the net over and over but nothing about the missing button. I know about how to c...

berainlb

02-08

467

5

0

Hi everyone i just started to experiment with puzzles on my laser and have seen almost all vids on the topic on Youtube Lots of good information.BUT our “friend” called Kerf is an acurring issue. My experience now is that its two solutions to deal with the kerf. If you are going to engrave your design directly on the puzzle, you can just separate e...

Andre J

02-07

482

6

0

This design with ruida software RDWorks V8And I cut it from ruida rdc6445g and results was amazing do you try it link is here 👇👇https://m.chanelink.com/share/design/1294

S A Designs

01-23

497

7

8

Aluminum magnesium manganese plate price is affected by the following factors.The price of aluminum magnesium manganese plate varies depending on various factors such as material specifications,production processes,market demand,international market conditions and exchange rate fluctuations.The following is an overview of aluminum magnesium mangane...

Aluminum magnesium manganese plate

02-08

417

5

2

China hydraulic sheet rolling machine manufacturer　　Once there is a deviation in the use of the hydraulic sheet rolling machine,it will endanger the production and processing products,resulting in the inability to use the products,as well as endangering work efficiency and product costs.So how to reduce or eliminate the application deviation of th...

qshbcn

02-12

345

1

1

Three Roller Type Sheet Metal Rolling Cone MachineWe are a professional manufacturer of Three Roller Type Sheet Metal Rolling Cone Machine with over 10 years of industry experience. Today, we would like to introduce to you: Three Roller Type Sheet Metal Rolling Cone Machine is a mechanical processing equipment used to roll metal sheets into var...

qshbcn

2024-12-29

396

3

2

plate rolling machine factoryWelcome to my plate rolling machine factory, where you can find the high-quality plate rolling machine you need at a cheap price, waiting for your consultation.Welcome to experience the excellent performance of our sheet metal plate rolling machine and special metal plate rolling machine, which are designed to reduce em...

qshbcn

2024-12-29

416

1

1

During the use of laser rust removal machines, various common problems may be encountered, which can be summarized as follows:1、 Optical path and laser source issuesFiber aging or damage:Phenomenon: After a period of use, optical fibers are prone to aging, leading to a decrease in power and signal attenuation, which affects the rust removal effec...

Kevin

02-12

371

0

0

1、 Material selectionThe material melted by laser should have a high melting point and thermal conductivity in order to better withstand the heat of the laser beam. Meanwhile, the chemical composition and crystal structure of the material can also affect the formation of cracks. Therefore, when selecting materials, these factors should be considere...

Nugent

02-11

419

0

1

In modern industry, laser cleaning is rapidly emerging as a superior surface treatment technology. Especially with the application of fiber lasers, the popularization and improvement of this technology have been achieved. Fiber lasers have become the best choice for laser cleaning light sources due to their high reliability, stability, and flexibil...

Marshall

02-10

418

0

0