English
  • I've been working with a Wattsan 0503 with the Ruida RDC6445S controller for 3 years and suddenly my machine has a problem. I turned to the reseller in the EU, but until today have gotten no solution so I turn to you. When I try to burn a simple test file, no matter how (Lightburn, RDWorks or as RD copied into memory), the controller displays onl...

    301
    14
    0
  • How to use multiple cutting heads simultaneously with RDWorks? I can only use one cutting head at a time. What settings am I missing? This is a four head CNC laser cutting machine with servo motor.

    10-14
    168
    2
    0
  • The machine has difficulty maintaining the correct sheet size when cutting material unwound from a roll. Lenght differences vary by +/- 5 mm.I think the solution to this problem would be to scan the edges with a camera and cut the sheet based on that, but unfortunatly I don't have that option anywhere. Machine - RDD658XVCamera - JNCPrograms - VCutW...

    124
    1
    0
  • I use CorelDaw to generate graphics and then transfer them to RDWorks through macros. I am quite certain that all settings are correct... I have successfully transferred several files to RDWorks and the preview looks good, but only a portion of the content was transferred for one file.

    10-09
    148
    1
    0
  • the head starts going up and down to make radius and certain curves they came out precise but take too long and I'm wondering if there is any setting i can try to solve this issue

    446
    6
    0
  • Hello I want to add a paint brush in a laser machine with RDC6442 controller. What output is used for this? In the manual it does not clarify witch output controlls the pen. Want to add a pneumatic valve to control the pen on/pen off.  

    09-28
    193
    1
    0
  • I have a new Perfect Laser laser cutting machine, measuring 64 inches x 102 inches, equipped with an automatic feeding platform and a fabric roller at the back end. My fabric pattern is longer than 102 inches. I think we can first cut off the fabric on the countertop, then move the countertop forward to pull more fabric, and finally complete the cu...

    09-28
    366
    1
    0
  • when I start or send files from Lightburn to laser machine the head follows the tool path but no laser connected by Ethernet  connection is good, reads machine seetings, saves steetings,  modify  backup etc etc Lightburn 1.7.08 trial   PC win 7  - maybe too old for 6445g  ?? Anyone know if Lightburn will work on the Ruida 6445g  conttroller...

    758
    3
    0
  • Why do I need a microsd slot inside the RDC8445S?It is also unclear what is written on the board on the left under the sticker. "RDC6642G-core wifi-c v1.0" 

    849
    5
    1
  • hope this email finds you well. I am writing to seek clarification regarding a point of discussion we had previously concerning the compatibility of RDV Print with the RD-8445S controller. You had mentioned that RDV Print is not supported on the RD-8445S.However, I had a conversation with the Technical head of Meheta High tech industries my vendor,...

    391
    3
    0
  • Currently using a LS6090 in a secondary school downloading files from RDworks as SVGs (DXFs just go all black on the laser cutter for some reason). Everything is cutting/engraving backwards/mirrored and we can't figure out why. A temporary solution has been to simply mirror designs within RDworks but something has gone wrong somewhere for this to b...

    801
    3
    0
  • The system freezes when accessing the File menu. I cannot click any buttons, and an error message appears as shown in the screenshot. I also cannot read, delete, or manage any files from the File menu. Is there any way to fix this issue or reset the system?https://drive.google.com/file/d/17Vj2YSxcx1MPpqyt3Xit0zr5pvN1LjKC/view?usp=sharing V

    814
    1
    1
  • Hello. Nesting does not work. I receive an undecipherable message "Г»ХTuSjУГb№". ) Software "VCutWorksSetup2.00.34-20250314". The computer is not connected to the machine, I need to work remotely, do cutting tasks.

    947
    5
    0
  • what is the default vendor password?

    524
    2
    0
  • Hello everyone,I am using a Ruida 6445G controller for my laser machine and I would like to know if it is possible to lock the machine (or the keyboard panel) with a password.My goal is: when the machine is powered on, the user must enter a password first before being able to control the machine.I tried setting up the password feature, but every...

    808
    3
    1