English
  • Hi everyone i just started to experiment with puzzles on my laser and have seen almost all vids on the topic on Youtube Lots of good information.BUT our “friend” called Kerf is an acurring issue. My experience now is that its two solutions to deal with the kerf. If you are going to engrave your design directly on the puzzle, you can just separate e...

    02-07
    39
    3
    0
  • Do you like the piggy bank? Look at this one I made?

    2023-02-02
    256
    3
    4
  • The fiber cutting control card is the control core of the fiber laser cutting machine. It is a motion control card that, by connecting to a PC and leveraging the powerful computing power of the PC, can quickly and accurately control the movement of the laser head to achieve high-precision and high-efficiency processing tasks.The use of fiber opti...

    02-07
    16
    0
    0
  • The fiber cutting control system is the control core of the fiber laser cutting machine. The operator transfers files to the fiber cutting control system and sets the corresponding parameters before starting processing. This is a modern intelligent CNC system. After completing the settings, the equipment can start processing independently without t...

    19
    0
    0
  • The reason for the sudden failure of laser cutting machine1. Laser malfunction. Laser is the core component of laser cutting machine. If the laser malfunctions, it will cause the laser cutting machine to malfunction.2. Optical path malfunction. The optical path is the channel through which the laser cutting machine transmits laser and performs cutt...

    01-20
    38
    0
    1
  • 1、 Reason for the problemIn the process of laser cutting, if the cutting line is too small or the laser power is too low, there will be a problem of non closure. In addition, if the cutting speed is too fast, this problem is also prone to occur. In addition, the material of laser cutting can also affect the closure of the cutting, and if the materi...

    42
    0
    0
  • I have a image that i duplicated a few time to make a longer image. I am trying to make this image fit into a circle to make this image round.I can do text fine. But not images. If there is away, please let me know. Thanks.

    01-13
    57
    8
    0
  • Probably is a dumb question, but is there a simple way if stopping knives on the laser bed from falling inwards when u take honeycomb in and out. Had to replace my knives and holder. Have tried hot gluing tabs on ends where the knives seat but they fall off after a week ot so.

    01-15
    47
    3
    0
  • In the daily operation of laser equipment, the constant emission of light is a common and difficult problem to solve. It not only affects the quality of the product, but may also increase the maintenance cost of the equipment. Faced with the problem of continuous light emission, it is urgent to quickly and accurately diagnose the location of the fa...

    01-10
    67
    3
    3
  • Possible reasons for the sudden stop of laser cutting1. Insufficient power: Insufficient power of the laser cutting machine may cause a sudden stop during the cutting process. This may be caused by a problem with the laser pump.2. Abnormal optical path: The deformation or contamination of mirrors in the laser optical path may also cause the laser c...

    01-13
    44
    1
    2
  • 1、 The lifespan of the nozzle has expiredThe service life of the laser cutting machine nozzle is limited, usually around 500 hours. If it exceeds the service life, both cutting quality and economic benefits will be affected, and a new nozzle needs to be replaced.2、 Damaged nozzleThe laser cutting machine nozzle is prone to damage, such as nozzle ...

    01-08
    42
    1
    1
  • I’ve had a aufero laser 2 with a ortur lu2-10a 24v laser module for about a year now.I was never able to achieve the thickness of cuts that are represented on their site and from other users.While doing some research, i noticed that the lu2-10a was sold as an upgrade and it came with an ouc board to inject another 24v to fire the 2nd 5w diode in th...

    01-03
    66
    3
    0
  • There are various types of paper materials with different characteristics. For example, commonly used printing materials such as news paper, copperplate paper, and offset printing paper have the characteristics of softness and good ink absorption. Packaging materials such as kraft paper and corrugated paper have the characteristics of tough texture...

    01-07
    79
    2
    3
  • Laser cutting technology is widely used in various industrial manufacturing fields due to its high precision and efficiency. However, in order to ensure cutting quality and equipment lifespan, it is necessary to strictly control the operating environment. The following are the key environmental conditions required for laser cutting:1、 Suitable te...

    68
    2
    4
  • Reasons for deformation of acrylic sheet during laser cuttingAcrylic sheet is a commonly used organic glass, which is widely used in industries such as advertising signs, lighting fixtures, furniture, etc. When laser cutting acrylic sheets, deformation may occur. There are various reasons for the deformation of acrylic sheets: it may be due to exce...

    2024-12-30
    73
    2
    3