- Nie rozwiązane
Ripple marks appear on the Y-axis of the CO₂ lead screw machine
What could be causing the wavy/rippled surface along the Y‑axis on our CO₂ lead‑screw machine? Any insights would be greatly appreciated. Thanks in advance.
- CO₂ laser
- 1 użytkownik odpowiedział
32 - Rozwiązane
CO2 laser power suddenly drops
My CO₂ laser power suddenly dropped. I checked the optical path and water temperature, and there does not seem to be any problem. There is a current indicator on the side of the machine. When I test a...
- CO₂ laser
- 2 użytkowników odpowiedziało
50 Laser used for laser drilling
Lasers primarily used for laser drilling applications are CO2, Nd:YAG, excimer, and copper vapor lasers (CVL). CO2 Lasers Pulsed-mode CO2 lasers can be used for drilling both metals and non-metals. ...
- CO₂ laser
Thomas4000- Nie rozwiązane
Omtech K40+
I try to connect my new Omtech K40+ but it is not recognized by the software. Driver is install and K40+ run on Lightburn withot problem. Whay should I do?
- CO₂ laser
- 1 użytkownik odpowiedział
63 Scenario for selecting CO2 laser cutting machine and fiber laser
When is the best choice for CO2 laser cutting machine In the field of non-metallic material processing, carbon dioxide laser cutting machine is recognized as the preferred technical solution due to i...
- fiber laser
- CO₂ laser
Matthew4700What are laser cutting accuracy and tolerance?
Laser cutting accuracy measures the consistency between the actual cutting contour and the digital design drawing, while tolerance defines the allowable deviation range within which this consistency p...
- fiber laser
- CO₂ laser
- laser cutting
Ignativs4800- Rozwiązane
Laser cutting system RDC6445G scanning shows ghosting
The control system used for my CO2 laser cutting equipment is RDC6445G. I noticed slight ghosting at the edges of the image during the scanning process, and the cutting trajectory was no longer clear ...
- RDC6445G
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 3 użytkowników odpowiedziało
123 - Rozwiązane
RDC6332NM controller XY axis control, unable to move
The control system used for my device is RDC6332NM. During device debugging, there was an abnormality in the XY axis: the zeroing action was normal, but there was no response in both axes when executi...
- coordinate axis
- RDC6332NM
- CO₂ laser
- laser cutting
- RuiDa
- 2 użytkowników odpowiedziało
215 - Rozwiązane
RDC6612U controller exhibits abnormal Z-axis movement
My CO2 laser cutting equipment uses the RDC6612U control system, but I found that the Z-axis movement is abnormal. When I long press Z - or Z+for about 4 seconds, the Z-axis keeps moving down or up. W...
- coordinate axis
- RDC6612U
- control system
- CO₂ laser
- RuiDa
- 2 użytkowników odpowiedziało
221 - Nie rozwiązane
Using Ruida to control dual Y-axis
Could anyone advise which Ruida controller supports dual Y-axis operation and is compatible with LightBurn? I have a CO2 laser system equipped with two closed-loop encoder motors on the Y-axis, and I'...
- coordinate axis
- LightBurn
- control system
- CO₂ laser
- RuiDa
- 1 użytkownik odpowiedział
87 - Rozwiązane
Why can't the RDC8445S controller panel positioning function be used?
Hello everyone! I have another question to ask, regarding the RDC8445S control system. I have noticed that the positioning function on the panel is not functioning properly. Every time the positioning...
- RDC8445S
- control system
- CO₂ laser
- RuiDa
- 2 użytkowników odpowiedziało
213 - Rozwiązane
RDC8445S controller has weak laser output and cannot control the light
When using the RDC8445S laser controller, I found that the laser output is very weak and cannot achieve the expected light intensity. Meanwhile, when I tried to adjust the light control function on th...
- RDC8445S
- control system
- CO₂ laser
- RuiDa
- 2 użytkowników odpowiedziało
249 - Rozwiązane
How to solve the problem of collision when the RDC6442G controller is enabled with absolute coordinates?
I have a CO2 laser cutting machine with a control system of RUIDA's RDC6442G. I have enabled absolute coordinates, but the equipment suddenly moves rapidly in the wrong direction while executing proce...
- RDC6442G
- control system
- CO₂ laser
- RuiDa
- 3 użytkowników odpowiedziało
207 - Nie rozwiązane
Why can't the multi-point positioning function be used on the RDC8445S controller?
My device uses the RDC8445S control system. Today, when I was processing, I set the U-axis to the rotation axis, but the original multi-point positioning function of the device cannot be used properly...
- RDC8445S
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 1 użytkownik odpowiedział
156 Key parameters affecting the performance of laser cutting machine cooling system
Choosing the right type of cooling system for a laser cutting machine is only the foundation, and its detailed design and operating parameters are the key to determining the thermal management effect ...
- fiber laser
- cooling system
- CO₂ laser
- laser cutting
Gary8801
CO₂ laser
103
Tematy2
ObserwującyOczekiwanie na odpowiedzi
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.