- Rozwiązane
Why can't the RDC6445G cutting head be controlled?
I have a CO2 cutting machine with a control system of Ruida's RDC6445G. Today, while operating the machine, I found an abnormality: the system ran normally after turning on, but the cutting head could...
- RDC6445G
- control system
- CO₂ laser
- RuiDa
- 2 użytkowników odpowiedziało
250 - Rozwiązane
How should I choose between the different Ruida controller models?
Looking for advice from Ruida controller users. Here’s the situation: I’m planning to upgrade my laser machine to a Ruida controller, mainly so I can use LightBurn. I’d like to know if there are any ...
- LightBurn
- control system
- CO₂ laser
- RuiDa
- 4 użytkowników odpowiedziało
334 Solution to Scanning Shape Tilt in CO2 Laser Cutting and Carving Control System
In the process of CO2 laser cutting and engraving, if there is a phenomenon of scanning pattern tilting, it is usually caused by setting problems between the control system or hardware. The following ...
- motion system
- control system
- CO₂ laser
- laser cutting
- RuiDa
Thomas22304Processing method for slow X-axis reset speed of CO2 cutting carving controller
The processing method for slow X-axis reset speed of CO2 cutting carving controller is as follows, which can be checked step by step: 1. Check the homing speed settings in user parameters First, e...
- coordinate axis
- control system
- CO₂ laser
- RuiDa
Ignativs20102- Rozwiązane
Why is my RDC6332NM control system setpoint not working?
After I turned on the CO2 cutting machine, the RDC6332NM control system seemed to be functioning normally. However, when setting the positioning point before processing, a problem occurred. No matter ...
- RDC6332NM
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 3 użytkowników odpowiedziało
264 - Rozwiązane
The RDC8445S controller is experiencing issues with the XY axis control not functioning
I have a CO2 laser cutting machine equipped with an RDC8445S controller. Today, while operating it, I suddenly noticed that the XY axis could not be controlled normally. Whether I operated it manually...
- coordinate axis
- RDC8445S
- CO₂ laser
- laser cutting
- RuiDa
- 2 użytkowników odpowiedziało
246 - Rozwiązane
How to solve the abnormality of Z-axis of RDC6585G controller?
I have a CO2 cutting machine equipped with a Ruida controller, model RDC6585G. I encountered a strange phenomenon: when I press Z- or Z+ for a longer duration (about 3-4S), the Z-axis will keep moving...
- coordinate axis
- RDC6585G
- control system
- CO₂ laser
- RuiDa
- 2 użytkowników odpowiedziało
255 Troubleshooting Method for Slow X-Axis Reset in CO2 Laser Cutting and Engraving Control System
When using CO2 laser cutting and engraving control systems such as the RDC6612U or RDC8445S, if the X-axis reset speed is slow, follow these steps to systematically check for potential causes and make...
- coordinate axis
- RDC6612U
- RDC8445S
- CO₂ laser
- RuiDa
Caspar24902Solution for CO2 cutting and carving control system with unclosed cutting graphics or uneven light output
In the process of using CO2 laser cutting and carving control system, if the cutting shape is not closed or the light output is uneven, it is usually caused by the following factors, which can be inve...
- laser engraving
- control system
- CO₂ laser
- laser cutting
- RuiDa
Jerome23914- Rozwiązane
Help! I can't access the USB flash drive on the RDC6332NM controller
It's really frustrating. The controller equipped on my CO2 laser cutting machine is RDC6332NM. Everything else is fine, but after inserting a USB flash drive, it cannot be accessed. My USB flash drive...
- USB
- RDC6332NM
- control system
- CO₂ laser
- RuiDa
- 3 użytkowników odpowiedziało
266 - Rozwiązane
What Is the Smallest Size a CO2 Laser Can Cleanly Cut in Acrylic?
Hi everyone, I’m planning to use a CO2 laser to cut acrylic sheets for building a miniature city model, and I’d like to know what the smallest practical size is that a CO2 laser can cut. By “smallest,...
- CO₂ laser
- laser cutting
- 3 użytkowników odpowiedziało
226 - Nie rozwiązane
I am using the RDC6585G controller and the Err light is on, what should I do?
I am using the RDC6585G controller and the Err light is on, what should I do? Do I need to return it to the factory for repair? Is there any other solution?
- RDC6585G
- control system
- CO₂ laser
- RuiDa
- 1 użytkownik odpowiedział
227 - Rozwiązane
Why can't the RDC8445S control system access the main interface?
Hello! When I opened the RDC8445S control system, the device started smoothly, but the control panel could not load the main interface properly. There is no cursor display on the screen, only a flicke...
- RDC8445S
- control system
- CO₂ laser
- RuiDa
- 2 użytkowników odpowiedziało
251 RDC6445G Control Panel Connection Line Port Pin Definition Explanation
Regarding the pin definition of the RDC6445G control panel connection line port, the explanation is as follows: Yellow (TXD): Transmit Data This pin is used to send data from the control panel to an ...
- control system
- CO₂ laser
- RuiDa
Ignativs21701- Rozwiązane
The RDC6442G control system experiences incorrect movements during the dual-head mutual movement
My CO2 cutting machine uses a Ruida controller, model RDC6442G. During processing, when the dual-head mutual movement function is enabled, the two cutting heads exhibit a phenomenon of disordered move...
- RDC6442G
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 3 użytkowników odpowiedziało
285
CO₂ laser
103
Tematy2
ObserwującyOczekiwanie na odpowiedzi
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.