Why is the welding of laser welding machines not firm1. Surface contamination of materialsGenerally speaking, when using a laser welding machine for welding processing, attention should be paid to whether there is dirt on the surface of the material. If materials with dirt are placed in the welding area, the surface of the material will not crystal...

Nugent

2024-04-24

615

1

0

With the continuous development of technology, laser cleaning machines have become one of the mainstream products in modern cleaning tools and are increasingly favored by people. In laser cleaning machines, small backpack type laser cleaning machines are increasingly favored by consumers due to their compact and portable characteristics. They use h...

Robert Evans

2024-04-19

718

1

0

1. Machine vibrationDuring the cutting process of a laser cutting machine, if it is affected by external factors such as water tanks, exhaust fans, etc., it may generate vibration, resulting in wave marks on the cutting surface.2. Gear slippingThe slippage between the gear and the gear seat may also cause wavy lines on the machined section.&nbsp...

Henry

2024-04-19

889

1

0

Laser achieves high-precision temperature control through various mechanisms:1) Accurate wavelength control: The laser can be designed to emit light of a specific wavelength, and the wavelength can be adjusted to match the absorption characteristics of the target material. This can precisely control the energy deposited into the material.2) Tight b...

RTP

2024-04-18

716

1

0

Laser engraving is currently widely used in various fields such as molds, signs, hardware accessories, advertising decorations, and automotive parts. Compared to traditional corrosion techniques, laser engraving has extremely high accuracy, achieving a positive or negative 0.1mm or even lower accuracy, and can easily handle difficult to handle righ...

Carey

2024-04-17

704

1

0

The quality of the marked lines or text may deteriorate, and there may be blurry, unclear, or uneven markings.

Cruise Wang

2024-04-17

763

1

0

Which color is the best for laser coding?

AL.TAL

2024-04-16

630

1

0

In the field of glass processing, laser cutting technology has gradually become a new favorite in the industry due to its high precision, high efficiency, and environmental protection characteristics. Among numerous laser cutting technologies, ultraviolet laser cutting machines and infrared laser cutting machines have become the focus of the market...

Noah

2024-04-15

685

1

0

Under what circumstances should the output power of the laser cutting machine be increased?

Aaron

2024-04-12

589

1

0

1. Adjust the machine assembly to improve cutting efficiency.Guide rail: When installing the guide rail, it must be parallel. If the guide rail is not parallel, there will be resistance during the operation and development of the machine equipment. The workpiece designed by cutting will have serrated edges. Therefore, the Y-axis guide rail must ful...

Abel

2024-04-12

660

1

0

If it is a machine, there will be losses, and the same goes for metal material laser cutting machines. In the long-term development and use process, we will definitely affect the existence of some more or less losses, such as slow cutting speed, poor cutting accuracy, and so on. Many people can think that it must be a decrease in laser power. In fa...

Williams

2024-04-12

632

1

0

There are several reasons and troubleshooting methods:1. When the vertical light is incorrect, please adjust the vertical light and readjust the light path if necessary.2. If the focal length is not adjusted properly, please refocus.3. The voltage is unstable, the voltage is low, and the laser current is too small. You need to replace a larger vol...

Carey

2024-04-09

623

1

0

With the continuous improvement of industrial production level, the industrial pollution and waste generated in the production process are also increasing, and more and more cleaning equipment is needed. Traditional cleaning methods have gradually been phased out, and laser cleaning, as a high-tech cleaning method, is increasingly being valued by p...

Kevin

2024-04-07

581

1

0

(1) PeelingThis is due to the lack of molten pool formation in the matrix, and the lack of metallurgical bonding between the powder and the matrix. Possible reasons include: low power; Excessive powder content; The linear speed is too fast; The surface of the workpiece may have oil stains or electroplating layers.(2) CracksThe reasons for the app...

Aaron

2024-04-07

670

1

0

The production and manufacturing of lithium-ion batteries include three parts: electrode manufacturing, cell manufacturing, and battery assembly. Adding laser cleaning in three processes can greatly improve the level of battery manufacturing technology.1. Laser cleaning before electrode coatingThe positive and negative electrode plates of lithium...

Henry

2024-04-02

645

1

0