I’m using the atomstack x30 and I wanted to check speed engraving things. So I found an image, set my power to 50 and my speed to 10000. It took about 12 minutes (4x5 image). I took the speed up to 15000, and it actually took 14 minutes. If I take it up to 20000 and I get 16 minutes. So I played around with settings until I found that 6500 wa...
2023-06-1048810Hi, Im new to the laser side and ready to start my first print and got it all ready to go except 1 thing. The file im looking to do has all the following and not sure order to do them in. Ive read that inner cut should take place before outer cuts. But what about engraving lines and lettering, should they go before I do the inner cut or after the i...
2023-06-1055610Hi,I would like to knw if i can replace Atomstack A10 pro 50w head with something more powerful? or is not possible?if yes, what do i need?thank you.
2023-06-1043710- LaserCoherent introduces 50W UV Femtosecond laser for cutting SiC wafers and stacking OLED displays
Coherent, a leader in industrial lasers for materials processing, today announced the introduction of a new industrial ultraviolet (UV) femtosecond laser, the Monaco, with an output power of 50 W, ideal for high-speed, high-volume wafer cutting and stacked OLED displays.The rapid growth of applications such as wafer slotting and display stack pre...
2023-06-0942210 Recently, the team of Gao Xiaoming, a researcher at the Institute of Optics and Light of the Hefei Institute of Physical Sciences, the Chinese Academy of Sciences, has made new progress in the simultaneous detection of NOx two-component in the static magnetic field Faraday rotation spectrum. The relevant research results were published in the inter...
2023-06-0931210Trimble has announced the X9 3D Laser Scanning System, a versatile reality capture solution for surveying, construction and engineering users. The X9 is designed to improve performance in more environments while leveraging Trimble's X-Drive technology for automatic instrument calibration, measurement-level self-tuning and laser designators for geog...
2023-06-0935510The Yellow DPSS Laser Market study provides a comprehensive study of the current stage of the market, covering the market size relevant to the assessment of sales volume, and provides a precise forecast of the market scenario for the projected period. It also focuses on products, applications, manufacturers, suppliers, and regional segments. The Ye...
2023-06-0947110Can I Ask Why the g code save have problem like this
2023-06-0936110I have seen other topics around this but still no solution. using the xtool native software, laser works great, the problems occur when moving over to Lightburn. I have followed all the recomendations and no matter what when clicking on HOME. the laser goes to the top left corner and hits the frame for approx 5 seconds. I have connected to wireless...
2023-06-0931910Hey all, not sure why or when this started happening, but when I used to make a box and put on T1, normally the Green Start Position Square would be at the top left corner of that box, but now I’ve resized that box and that start square does not want to follow my left corner, it’s just floating all around by itself? what’s going w...
2023-06-0942410Hi! I had some great suggestions yesterday to clean up the outer edges of my fill by using offset, and that worked perfectly, but now the inner part is not filling. (engraving on a leather patch, Eleksmaker A3) - I “think” it’s a dpi issue, as I havent really been able to properly figure out the right settings for this machine (it...
2023-06-0935910I have S9 with Y axis expansion. Overhead I have securely fixed a 5MP light burn camera 120 degree viewing angle. The camera is physically aligned to the centre of the frame in a way that it can not move. I use sculpfun honeycomb which measures 400x800. The honeycomb position is fixed relative to the frame using a jig. The camera is aligned in port...
2023-06-0939710read from the controller, salve ho un problema con il tempo stimato, ho fatto leggi dal controller ma non cambia niente su un progetto mi dice 4 ore e 19 minuti ma ci impiega 10 ore, come posso risolverlo??read from the controller, hi i have a problem with the estimated time, i did read from the controller but nothing changes on a project it tells ...
2023-06-0937710hello everyone,I am developing some parts (tags) for QRCODE engraving, does anyone know, or can share here, some engraving tips, I am engraving in AISI 304 stainless steel, in the natural finish of steel, to obtain the code reading, I use the EZCAD. Thanks
2023-06-0833220Rayco Laser has announced that it has set up an authorized service center in India to better serve the regional market.In the future, the company will provide more convenient and efficient technical support and services for the Indian market, and further strengthen the company's service capabilities on a global scale.The service center is...
2023-06-0846110
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski