- 已解决
Why Does My Illustrator SVG Import with Different Measurements on a Laser Cutter?
Why does my Illustrator SVG import with different measurements on a laser cutter? The exported file contains unit settings, which I did not change... Does anyone know why? Thanks.
- laser cutting
- 3 位用户已回答
304 - 已解决
Why does the RDC6612U controller display communication failure after a delay of 30 seconds when reading files?
My RDC6612U control system has encountered a new issue. As usual, when I select the processing file, the screen first displays "Reading" normally, and the progress bar slowly advances. However, after ...
- RDC6612U
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 3 位用户已回答
240 - 已解决
RDC6332NM Controller: Why doesn't the device return to the home position after completing processing?
Hello everyone, I have another question regarding the RDC6332NM controller. After completing a machining operation, the equipment did not return to its preset positioning point, preventing the next ma...
- RDC6332NM
- control system
- laser cutting
- RuiDa
- 3 位用户已回答
252 - 未解决
The RDC6612U controller displays the message “Motherboard is encrypted”
While machining with the RDC6612U controller, I encountered a message stating: “The mainboard is encrypted.” How do I decrypt it? Do I need to contact the manufacturer?
- RDC6612U
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 1 位用户已回答
216 - 未解决
What’s the most challenging laser cutting project you’ve ever worked on, and how did you get through it?
I’ve been doing laser cutting for several years, and recently I took on a project that really tested my skills. I decided to make an intricate 3D puzzle for my daughter’s birthday, but it turned out t...
- makers & DIY
- laser cutting
- 2 位用户已回答
367 - 已解决
How to solve the air pressure alarm of RDC6563FG control system?
Hello everyone! I have a fiber laser cutting machine with a control system of RDC6563FG. During my routine inspection today, I found that there has been a continuous air pressure alarm. Where is the p...
- RDC6563FG
- fiber laser
- control system
- laser cutting
- RuiDa
- 2 位用户已回答
246 - 已解决
Why can't RDC6612U-DFM be positioned and processed using crossbeam 1?
I have been using the RDC6612U-DFM controller for about 2 weeks now, and some of the operations are not very familiar. Today, I found that I cannot use crossbeam 1 for positioning processing. I am not...
- RDC6612U
- control system
- laser cutting
- RuiDa
- 2 位用户已回答
233 - 已解决
RDC6585PC dual board spray cutting integrated layer without blowing air, what should I do?
My dual board spray cutting integrated equipment has encountered an abnormality. The control system model is RDC6585PC, which starts normally, but the layer blowing function cannot be activated. Curre...
- RDC6585PC
- assist gas system
- control system
- laser cutting
- RuiDa
- 2 位用户已回答
231 - 已解决
How to solve the problem of RDV6555G controller laser being unable to control?
I have been using Ruida's controller, model RDV6555G. During another routine equipment inspection today, I found that the controller cannot control the laser output properly. I tried to restart the de...
- laser source
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 位用户已回答
243 CO2 laser cutting carving controller XY axis malfunction
When using the CO2 laser cutting and engraving control system, if you encounter this problem: the X-axis stops after hitting the limit switch during power on reset, while the Y-axis is still running s...
- coordinate axis
- control system
- CO₂ laser
- laser cutting
- RuiDa
Thomas20913- 未解决
Does anybody know the latest and stable software upgrade for RDVisionWorks(1.00.115)
Does anybody know the latest and stable software upgrade for RDVisionWorks(1.00.115)? I am having big issues with Ver1.00.115 running (Dual beam). After camera calibration, i could not go any further ...
- RDVisionWorks
- RDC6685U
- laser cutting
- 2 位用户已回答
259 Solution for RDBox Cloud Data Access Issue
The issue of being unable to access data in RDBox Cloud may be caused by various factors. Below are some common troubleshooting methods and solutions to help you diagnose and resolve the problem: 1. ...
- RDBox
- laser cutting
- RuiDa
Matthew19900Reason for communication failure between RDC6685U controller and software via USB
There may be multiple reasons for communication failure between RDC6685U controller and software via USB. The following are common reasons and solutions: 1. The driver is not installed correctly: Rea...
- USB
- RDC6685U
- laser cutting
- RuiDa
Jerome26003The solution to using RDWorksV8 to process points that emit light but cannot cut light
When using RDWorksV8 for machining, if there is a situation where there is light emission or cutting failure, the following methods can be used to solve the problem: 1. Incorrect layer output setting...
- RDWorksV8
- laser cutting
- RuiDa
Adrian21900- 已解决
What is the solution for RDC6555G cutting with a protrusion at the starting position?
My cutting machine uses the Ruida control system, model RDC6555G. At the moment of starting cutting, a melting protrusion similar to a "matchstick head" is easily formed at the starting position. Duri...
- RDC6555G
- control system
- laser cutting
- RuiDa
- 3 位用户已回答
238
laser cutting
364
话题593
粉丝等待回答
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.