BIOLASE is taking the necessary steps to optimize operations to capitalize on the growing business momentum of its market-leading dental lasers. The company believes that its revenue-generating strategy and prudent expense management, coupled with the recently completed share issue to strengthen the balance sheet, will enable it to achieve its sale...
2023-06-1054210I got my first laser Atomstack x20 a few days ago…and I noticed that It is very noisy and smells not good…So I’d like to connection via wifi because doing job from a distance…I tried to connect via Tibbo Vitual port, but when I command to frame, good job and It is start and then stops working in the actual work command&he...
2023-06-1057510I assembled the extension kit offered by Ortur that changes the work area from 400mmx400mm to 400mmx800mm. I changed the dimensions of the laser in Lightburn to match the new 400mmX800mm work area. However, the machine will not go outside of the original 400mmX400mm workspace. It gives me the error code:ALARM:2G-code motion target exceeds machine t...
2023-06-1050310I’m using the atomstack x30 and I wanted to check speed engraving things. So I found an image, set my power to 50 and my speed to 10000. It took about 12 minutes (4x5 image). I took the speed up to 15000, and it actually took 14 minutes. If I take it up to 20000 and I get 16 minutes. So I played around with settings until I found that 6500 wa...
2023-06-1064610Hi, Im new to the laser side and ready to start my first print and got it all ready to go except 1 thing. The file im looking to do has all the following and not sure order to do them in. Ive read that inner cut should take place before outer cuts. But what about engraving lines and lettering, should they go before I do the inner cut or after the i...
2023-06-1069110Hi,I would like to knw if i can replace Atomstack A10 pro 50w head with something more powerful? or is not possible?if yes, what do i need?thank you.
2023-06-1057410- LazerCoherent introduces 50W UV Femtosecond laser for cutting SiC wafers and stacking OLED displays
Coherent, a leader in industrial lasers for materials processing, today announced the introduction of a new industrial ultraviolet (UV) femtosecond laser, the Monaco, with an output power of 50 W, ideal for high-speed, high-volume wafer cutting and stacked OLED displays.The rapid growth of applications such as wafer slotting and display stack pre...
2023-06-0960010 Recently, the team of Gao Xiaoming, a researcher at the Institute of Optics and Light of the Hefei Institute of Physical Sciences, the Chinese Academy of Sciences, has made new progress in the simultaneous detection of NOx two-component in the static magnetic field Faraday rotation spectrum. The relevant research results were published in the inter...
2023-06-0948810Trimble has announced the X9 3D Laser Scanning System, a versatile reality capture solution for surveying, construction and engineering users. The X9 is designed to improve performance in more environments while leveraging Trimble's X-Drive technology for automatic instrument calibration, measurement-level self-tuning and laser designators for geog...
2023-06-0949810The Yellow DPSS Laser Market study provides a comprehensive study of the current stage of the market, covering the market size relevant to the assessment of sales volume, and provides a precise forecast of the market scenario for the projected period. It also focuses on products, applications, manufacturers, suppliers, and regional segments. The Ye...
2023-06-0960610Can I Ask Why the g code save have problem like this
2023-06-0950010I have seen other topics around this but still no solution. using the xtool native software, laser works great, the problems occur when moving over to Lightburn. I have followed all the recomendations and no matter what when clicking on HOME. the laser goes to the top left corner and hits the frame for approx 5 seconds. I have connected to wireless...
2023-06-0947210Hey all, not sure why or when this started happening, but when I used to make a box and put on T1, normally the Green Start Position Square would be at the top left corner of that box, but now I’ve resized that box and that start square does not want to follow my left corner, it’s just floating all around by itself? what’s going w...
2023-06-0959710Hi! I had some great suggestions yesterday to clean up the outer edges of my fill by using offset, and that worked perfectly, but now the inner part is not filling. (engraving on a leather patch, Eleksmaker A3) - I “think” it’s a dpi issue, as I havent really been able to properly figure out the right settings for this machine (it...
2023-06-0949510I have S9 with Y axis expansion. Overhead I have securely fixed a 5MP light burn camera 120 degree viewing angle. The camera is physically aligned to the centre of the frame in a way that it can not move. I use sculpfun honeycomb which measures 400x800. The honeycomb position is fixed relative to the frame using a jig. The camera is aligned in port...
2023-06-0951110
- Veri Yok
Türkçe
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski