- Resolvido
RDC6445G controller failed to load the panel when turned on
The control system used for my device is RDC6445G. Today, I found that the panel loading was abnormal and I was unable to enter the main interface normally. There is no cursor flashing on the screen, ...
- RDC6445G
- control system
- laser cutting
- RuiDa
- 2 usuários responderam
248 MantiSoft--Ruida Technology's New Laser Control Software Platform
Hello, everyone in the laser processing industry! We’re thrilled to share some exciting news: RuiDa Technology has launched a new generation of laser control software Mantisoft—it’s free to use, so go...
- MantiSoft
- control system
- laser cutting
- RuiDa
Ruida Technology46092What are laser cutting accuracy and tolerance?
Laser cutting accuracy measures the consistency between the actual cutting contour and the digital design drawing, while tolerance defines the allowable deviation range within which this consistency p...
- fiber laser
- CO₂ laser
- laser cutting
Ignativs4800Cut Factory Costs by 30%! Laser Cleaning Matches Precision Spot Welding
Running a manufacturing factory these days is really tough, isn’t it? Raw material prices keep rising, labor costs surge, and environmental inspection standards get stricter every year. Many small and...
- laser cleaning
- laser welding
- laser cutting
jason@mavenlaser6100Selection of laser cutting machines suitable for cutting metal sheets
Which lasers can cut metal sheets? In the field of metal sheet cutting, optional solutions include plasma cutting, waterjet cutting, mechanical shearing, and traditional carbon dioxide laser systems....
- fiber laser
- laser cutting
Caspar6000- Resolvido
RDWorksV8 always encounters distance limitations during edge patrols
Hello everyone! When using RDWorksV8 for edge cutting, the device often pops up a distance limit prompt before the path is completed, causing the laser head to stop or retract. I have repeatedly adjus...
- RDWorksV8
- laser cutting
- RuiDa
- 3 usuários responderam
123 - Resolvido
How to set cutting points for RDWorksV8?
I have a simple question, how to set the cutting point in RDWorksV8? Thanks in advance!
- RDWorksV8
- laser cutting
- RuiDa
- 2 usuários responderam
124 Guidelines for laser cutting cylinder distribution
Laser cutting is one of the most precise and technologically advanced manufacturing processes today. Most people are not unfamiliar with its application on flat materials such as metal sheets, but onc...
- laser cutting
Jerome5800Tired of Defects in Hardware Renovation? New Process with Laser Cleaning & Precision Spot Welding
Factory owners and technicians engaged in hardware renovation, metal craft restoration and tooling maintenance must be troubled by common industry problems. Rust, oil stains and oxide layers on workpi...
- laser cutting
jason@mavenlaser6200手持式激光焊接机闲置不用？探索这6种未被充分利用的应用场景。
手持式激光焊接机闲置不用？探索这6种未被充分利用的应用场景。 许多工厂主仅使用手持式激光焊接机进行简单的不锈钢板接头焊接，这极大地浪费了设备的性能。由于官方手册内容较为笼统，大多数操作人员仅掌握了基本操作，导致机器的全部功能未能得到充分发挥。 以下列举了六种在实际生产环境中验证过的实用且常被低估的应用。阅读后，您将全面了解这套设备的功能。 隐藏应用1：五金模具的堆焊与修复 场景：修复注塑模具和冲压...
- laser cleaning
- laser welding
- laser cutting
SR3RBSV56500- Resolvido
Laser cutting system RDC6445G scanning shows ghosting
The control system used for my CO2 laser cutting equipment is RDC6445G. I noticed slight ghosting at the edges of the image during the scanning process, and the cutting trajectory was no longer clear ...
- RDC6445G
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 3 usuários responderam
123 - Resolvido
RDC6555G controller laser cannot be controlled
I am using the RDC6555G controller to prepare for processing, but I have found that the laser cannot respond to commands properly. Whether adjusting the power or modifying the path parameters, the las...
- power supply
- RDC6555G
- control system
- laser cutting
- RuiDa
- 3 usuários responderam
295 - Resolvido
RDC6332NM controller XY axis control, unable to move
The control system used for my device is RDC6332NM. During device debugging, there was an abnormality in the XY axis: the zeroing action was normal, but there was no response in both axes when executi...
- coordinate axis
- RDC6332NM
- CO₂ laser
- laser cutting
- RuiDa
- 2 usuários responderam
215 Laser Pre-Cleaning to Solve Oxidation Defects in Precision Spot Welding
In the spot welding processing of precision small hardware and electronic terminals, ultra-thin oxide layers and processing oil stains on workpieces are nearly invisible. Yet they frequently lead to c...
- laser cutting
jason@mavenlaser6400Struggling with Residues After Workpiece Cleaning? Laser Precision Cleaning Machine Solves Precision Manufacturing Problems
Manufacturers and procurement engineers engaged in precision parts processing must have encountered this troublesome situation. Traditional sandblasting and chemical soaking cleaning will scratch the ...
- laser cutting
jason@mavenlaser8000
laser cutting
364
Tópicos593
SeguidoresAguardando respostas
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.