- Niet opgelost
Why does the RDV6555G controller experience offset during cutting?
The control system used for my laser cutting machine is RDV6555G. Today, there was a significant cutting offset issue during processing. I changed the material for testing and the problem still exists...
- RDV6555G
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
252 - Opgelost
Why is the grating protection signal of RDV6555G control system ineffective?
The controller used for my device is RDV6555G, which has been connected to a grating protection device. However, in actual operation, I tried to block the grating multiple times, but the machine conti...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
205 - Niet opgelost
RDV6555G controller cutting starting position abnormal
Hello everyone! My device uses the RDV6555G control system. When performing machining operations, a protrusion similar to a "matchstick head" will appear at the starting position of the cutting, great...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
201 - Niet opgelost
The feeding frequency of RDV6555G controller is not effective
I found that the set feeding frequency parameter did not take effect properly when using the RDV6555G control system for automatic feeding processing. Although the equipment can complete the processin...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 1 gebruiker beantwoord
147 - Opgelost
RDV6555G Control System Visual Matching Mark Prompt C++ Garbled Characters
The controller used in my machine is the Ruida RDV6555G. When performing vision-based positioning machining and activating the Mark point matching function, a pop-up window displays C++ garbled charac...
- RDV6555G
- control system
- RuiDa
- 2 gebruikers beantwoord
243 - Opgelost
Why does the planned position and actual position of the RDV6555G controller not match the coordinates?
My cutting equipment has a troublesome problem, and the controller model used in conjunction with it is RDV6555G. The position planned by the system does not match the actual operating position of the...
- motion system
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
227 - Opgelost
RDV6555G controller produces shaking lines when cutting corners
When using the RDV6555G controller for laser cutting, I found that the equipment performs normally in straight line operation, but there are obvious abnormalities when it reaches the position of turni...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
226 - Opgelost
RDV6555G control system scanning shows ghosting
I have a laser cutting machine that uses Ruida's control system, model RDV6555G. Today, I noticed a ghosting during scanning, where the same straight line seems to have been traced twice, with slight ...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
236 - Opgelost
What is the reason for the low linear power of RDV6555G controller?
When I was using the RDV6555G control system for machining, the power output of the equipment was normal when running on short straight lines, and the machining effect was stable without any obvious a...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
205 - Opgelost
RDV6555G control system, why can't the first point be pieced together?
When using the RDV6555G control system for graphic stitching processing, I found that the first point could not be accurately aligned. At first, only a few files had slight misalignment, thinking it w...
- motion system
- RDV6555G
- control system
- RuiDa
- 2 gebruikers beantwoord
230 - Opgelost
How to solve the problem of RDV6555G controller laser being unable to control?
I have been using Ruida's controller, model RDV6555G. During another routine equipment inspection today, I found that the controller cannot control the laser output properly. I tried to restart the de...
- laser source
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
244 Solution for RDC/V6555G Controller Button Movement with XY Axis Unchanged
For the issue of no response on the XY axis when the RDC6555G and RDV6555G controller buttons move, the following steps can be followed to troubleshoot each one: 1. Check whether the wiring is correc...
- motion system
- coordinate axis
- RDV6555G
- RDC6555G
- RuiDa
Jerome23212- Opgelost
Laser cutting machine using RDV6555G, reset failed
The laser cutting machine uses RDV6555G, and the reset fails. My cutting machine is equipped with the Ruida control system RDV6555G, but the reset fails. When resetting, the panel flashes briefly and ...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 3 gebruikers beantwoord
277 - Opgelost
RDV6555G control system, Y-axis power weak, X-axis power normal
Has anyone else encountered this issue? My cutting machine is equipped with an RDV6555G control system, where the Y-axis drive has insufficient power output, while the X-axis is functioning normally. ...
- coordinate axis
- RDV6555G
- control system
- laser cutting
- RuiDa
- 3 gebruikers beantwoord
279 - Opgelost
RDV6555G: Axis runaway occurred during cutting completion and return to home position
My RDV6555G control system operates normally during the cutting process, but exhibits axis runaway when returning to the home position after cutting is completed. How can I resolve this issue? Who can...
- coordinate axis
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 gebruikers beantwoord
285
RDV6555G
20
Onderwerpen4
Volgers
Wacht op antwoorden
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.