When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certai

Jamie

Categories:

Ruida

Tags:

Ruida

410

See translation

2022-12-24

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certain length, and then the laser cutting stops. (Automatic blocking does not work)

Durell

2022-12-27

The laser head must be stopped at the bottom of the Y-axis direction (the end close to the person) because the operation position of the laser head is not correct.

See translation

Relevant recommendations

Collect

Report

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certai

replace the ruida rd6445g-dfm-rd with the...

HELP! RDVisionWorks U-Axis Moving Before Cutting Is Completed

The cutting head automatically focuses or moves downward at any time.

Press Z-axis to move manually on the panel, and the cutting head does not move

When pressing Z - or Z+for a longer time (about 3-4S), the Z axis will go down or up all the time, and it is normal to press Z - or Z+for a shorter time.