Does anyone know how to cut at a 45 ° angle? I am using the Thunder Nova 63 laser cutting machine. I would like to know if there are any ways to achieve cutting angles on materials such as wood and acrylic?
16 hours ago7700Laser cutting technology, with its wide applicability, has penetrated into many industrial fields. In practical operation, the selection of auxiliary gas has a decisive impact on cutting quality, processing efficiency, and the final product effect. Whether it is carbon steel, stainless steel, aluminum or brass, selecting the appropriate gas can sig...
17 hours ago10100Positive focus cutting is a technique that precisely sets the laser focus on the top surface of the workpiece. The core principle is to make the light beam form a larger spot at the bottom of the material, thereby enhancing the oxidation reaction involving oxygen. This can significantly improve slag discharge efficiency and reduce slag adhesion. Th...
3 days ago9211I am cutting the end caps of some aluminum cans using the latest version of LB software (2.0.04) and my rotary chuck. All components are horizontal, tangential, vertical, etc. - I have checked repeatedly because on my first attempt, I found that after rotating the chuck once, the cutting lines did not coincide again.This left me puzzled, so I tried...
4 days ago13120I am working on a lantern. Specifically the top and bottom. It has an outline to cut. An then the slots inside that. I worked out the kerf. And tested using a standalone slot. Worked fine.Originally the slots and the outer cut were on the 00 layer. I applied the kerf to the 00 layer. Cut and the kerf had no effect. Worked all day playing with it an...
3 days ago9110Laser cutting has become the preferred process in the field of carbon steel processing due to its high precision, high efficiency, and wide applicability. However, in order to obtain clean incisions, reduce burrs, and ensure overall cutting quality, it is necessary to carefully optimize the cutting process. This guide will provide key optimization ...
2 days ago7600cutting a square 5 x 5mm it cuts it at 4 x 5mm, it works fine when I disconnect the R5 looks like something to do with the Y axis
11-0715830I downloaded a project where there were two parallel cutting lines at a distance of 0.30 mm and the other two were at a distance of 0.23 mm. In the first case the laser made two lines and in the second it did not make a cut. I remember reading somewhere that there is a setting that determines the minimum distance when the laser takes two lines as o...
11-0813120Fiber laser cutting technology, with its excellent speed, precision, and efficiency, has become an important pillar in the field of modern metal processing. However, relying solely on the performance of the equipment itself is not enough to ensure continuous clean and high-quality cutting results. To achieve stable and excellent cutting performance...
4 days ago12800Chamfering technology enters the era of lasersIn metal welding pretreatment, traditional edge chamfering usually relies on processes such as plasma cutting, milling, or grinding. However, with technological advancements, advanced laser cutting systems have become a better solution. It can not only complete this task, but also achieve high-quality c...
11-1014700The energy consumption of laser pipe cutting machine is one of the core considerations of equipment comprehensive cost. This article aims to analyze in depth its daily operating costs and key influencing factors, providing decision-making basis for selecting cost-effective equipment.1. Reference Cost of Operating a Laser Tube Cutter(1) Total powe...
11-07135001、 What is a coil laser cutting machine?The coil laser cutting mechanism has established a highly integrated manufacturing ecosystem, which not only realizes fully automatic continuous production from coil unwinding to finished product stacking, but also completely subverts the traditional single sheet feeding operation mode, leading a fundamental ...
11-0613100I have a Monport 100 watt laser cutting machine with autofocus function. Recently, I have encountered a problem where the horizontal line shakes while the vertical line is very straight. I searched online and most of the answers said it might be because the Y-axis belt is loose or the belt is missing teeth. I bought this machine in January this yea...
11-04142101. What is the dimensional accuracy of laser cutting?Someone asked me if the accuracy of ± 0.05 millimeters really exists. My answer is yes, provided that the tool stacking is correct. Focus on beam mode, rigid mechanical structure, encoder feedback, and stable cutting parameters. In addition, the workbench should be kept clean as chips and slag c...
11-0516301Can Lasergrbl be used for carving and cutting in the same project?My machine is a 10W laser
10-2821440
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski