When I try to depict a simple rectangle, the pattern is a bit skewed and the side lengths are not perpendicular. Width 205 millimeters, height 305 millimeters. I have tightened the belts on both shafts and have not noticed any belt jumping. What is the solution?
9 hours ago2100Why do the lines I get always bend? Whether I use vectorization or any other settings, the lines are never perfect. I saved them in PNG and JPEG formats, but the problem persists.
2 days ago4720Is there a way to locate the imported SVG file to a specific coordinate in the workspace? I know that Xpos and Ypos parameters can be used to move file locations. I also know that if the file import option is used, the default location is the center of the workspace; If drag and drop operation is used, the default position is the position where the...
2 days ago7820Some of my pictures (letters) are not filled in. The enlarged image shows that the lines are closed, but in reality, the lines only appear intermittently and are not fully filled. In the same file, some letters are filled in completely, while others are not. Who can give some advice?
a day ago2910Connecting different metals often sounds complicated, especially in terms of strength, corrosion resistance, and durability. Many people have a question, can steel and stainless steel be welded together? The answer is yes, steel and stainless steel can be effectively welded together through laser welding. The key lies in precise control of heat and...
10 hours ago2100I have a 50W CO2 laser cutting and engraving machine, and recently I purchased a laser power meter. I need to develop a measurement program on how to use the laser power meter. Here is my plan.•Ensure you have the correct laser power meter for your laser source and and position the sensor so that it intercepts the path of the defocussed beam.•Fire...
09-30566501. Key components of fiber laser cutting machineLaser light sourceFiber laser source is the core component of industrial laser cutting technology, which relies on fiber doped with rare earth elements to generate high-quality laser beams. Below is an overview of fiber laser sources used in the cutting field, including their main functions, selection...
3 days ago10110Hello, I have dual gantry machine with RDC6612U mainboard. If I push "stop" button during cutting process then gantries moving back to home position and one of gantry hit into second gantry. After this on operation panel is collision alarm info. What can be reason ?
a day ago3100I downloaded and installed a font on my laptop, but it cannot be loaded into rdworks v8. What is the reason?
2 days ago7210By using fiber lasers, combined with high-pressure nitrogen gas as an auxiliary gas, and setting lower power and high focus, metal burns can be effectively avoided when cutting stainless steel and aluminum materials. This process can achieve non oxidizing and clean cutting edges.How do you laser cut without burning?To laser cut without burning, I...
a day ago3500I use Roly Lasermatic mk2 10/20w laser, the laser flickers when moving along the X-axis, even when just firing the laser in light burn and moving it back and forth. The laser seems to flicker off and back on in relatively the same place.
11-2413520Fiber laser cutting machine uses fiber laser as the core light source. The working principle is that the high-energy laser beam generated by the laser is focused and forms a tiny spot on the surface of the workpiece, causing the material to instantly reach a molten or vaporized state in the illuminated area. At this point, automatic cutting of the ...
2 days ago7500Do I need a licence to run the Ruida Software, RDUnionLaserV2.0?
11-21224100What Factors Affect Laser Welding Machine Prices?The price of laser welding machines is influenced by multiple factors. Among them, laser power, brand differences, and customized needs will significantly affect the final pricing. Generally speaking, the higher the laser power, the higher the equipment price. For example, high-power models such as 3...
11-2214210I’m new to laser cutting veneer. I still haven’t figured out how to separate the complete line drawing into parts for cutting. I’m working with a line drawing of a flower with 5 petal parts and a center - two leaves with two parts each and a stem with two parts.
11-2020240
- No Data
English
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski