Can I install both proximity sensors and mechanical limit switches on each axis of a Ruida RDC 6445S controller? I'd like the proximity sensors to act as the primary reference, with mechanical switche...

• RDC6445S
• laser head
• control system
• RuiDa

When using laser cutting, there is no size error. However, when using the pen marking function—for example, drawing a circle with a 4mm diameter—it only produces a circle of about 3.5mm. How can this ...

• RDC6442S
• laser cutting
• RuiDa

After replacing the laser tube, the power of the RD 644xs engraving machine cannot be adjusted. The speed can be adjusted, but the power cannot be adjusted. What is going on?

• laser engraving
• RuiDa

My files are PLT format. When I open a file and download it to the machine, the file name is not automatically taken from the first 8 characters of the original file name. How do I configure this?

• laser cutting
• RuiDa

I tried using the AI plugin as an external add-on, and it worked on the first day of trial. But when I tried again the next day, it stopped working. When I click Process, the screen just flickers and ...

• RDWorksV8
• RuiDa

I'm having trouble with Vcutworks — the cuts are not round, especially for small circles where the problem is really obvious. On the same line, there's about 1mm difference between going back and fort...

• VCutWorks
• RuiDa

Motherboard: RDC6445S, Version: V26.01.16 Fault Description: Y-axis drift — When running a frame cycle, the Y-axis returns to the home position with a consistent offset in the same direction each ti...

• motion system
• coordinate axis
• RDC6445S
• control system
• RuiDa

I'm using an RDC6442S-B(EC) controller, and I've connected my laser to the local network. The network connection itself seems fine, but RDWorks keeps giving me a "communication failed" error. Any idea...

• RDWorksV8
• laser engraving
• control system
• RDC6442S
• RuiDa

I have an RDC6445S controller on a dual-head laser machine with independent offset capability. The distance between the two laser heads is 170mm, and the cutting area is 1600×1000mm. In the manufactur...

• coordinate axis
• RDC6445S
• laser head
• control system
• RuiDa

How to use RDWorksV8 for multi window operation or set up dual opening, with one computer controlling multiple devices?

• RDWorksV8
• RuiDa

How to avoid misalignment when cutting multiple virtual array elements? My controller is RDC6445S

• RDC6445S
• laser cutting
• RuiDa

Our current setup uses an RDC6442G controller with RDWorksV8 as the host software. I have thoroughly reviewed the full list of manufacturer parameters, but there is no dedicated setting for the homin...

• RDC6442G
• RDWorksV8
• control system
• RuiDa

I'm looking for step-by-step guidance on setting up a rotary attachment in RDWorks. The rotary is spinning, and I've tried changing the steps and diameter values, but the outcome remains unchanged. Am...

• rotate
• RDWorksV8
• RuiDa

My Ruida RDC6445S controller (firmware version RDC6445S-V26.01.19) does not respond to the Air Assist switch command enabled in LightBurn. However, the solenoid valve operates normally when connected ...

• assist gas system
• power supply
• RDC6445S
• LightBurn
• RuiDa