- Çözüldü
RDC6555G controller crashes when importing new drawings
I tried to import a new drawing for the RDC6555G control system, but the system suddenly crashed during the import process. Every time a drawing file is selected and loaded, the controller interface f...
- RDC6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
209 - Çözüldü
RDC8445S controller motherboard cannot be used
I found an abnormality in the motherboard during routine equipment inspection of the RDC8445S control system. The panel originally used to control laser engraving and cutting cannot start, and the scr...
- power supply
- RDC8445S
- laser engraving
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
213 - Çözüldü
I use RDWorksV8 to cut graphics that are not closed
I am using RDWorksV8 for laser cutting, but the shape is not closed. Originally a closed shape, a gap appeared during the cutting process. I rechecked the design file and confirmed that the path is cl...
- RDWorksV8
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
235 - Çözüldü
Why is the Y-axis power weak for RDC6555G controller?
My device is equipped with the RDC6555G control system. I am preparing to cut the workpiece, but I found that there are significant differences in the cutting effect of the device in different directi...
- coordinate axis
- RDC6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
216 - Çözüldü
RDC6555G controller cutting path is chaotic
Hello! I encountered a problem while using the RDC6555G control system for laser cutting: the cutting paths in the same graphic are confused. After preparing the cutting file, I followed the usual ste...
- motion system
- RDC6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
223 - Çözüldü
Why does the RDC6585G control system keep moving after pressing a key once?
My device control system model is RDC6585G, and I encountered a problem. I pressed the directional keys once on the control panel, and the machine continued to move in the same direction, as if the ke...
- motion system
- RDC6585G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
211 Considerations for selecting fiber laser cutting machines for specific industries and applications
When choosing a fiber laser cutting machine, there are significant differences in the process requirements of different industries. Even with the same equipment, power, configuration, or cutting platf...
- fiber laser
- laser cutting
Caspar20901- Çözüldü
Why does the planned position and actual position of the RDV6555G controller not match the coordinates?
My cutting equipment has a troublesome problem, and the controller model used in conjunction with it is RDV6555G. The position planned by the system does not match the actual operating position of the...
- motion system
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
227 - Çözülmedi
What could be causing files to not appear in the controller's memory after a successful transfer?
Problem Description: When I send a file from my PC using RDWorks software to the controller, the transfer appears to complete successfully, and RDWorks displays a "transfer successful" message. Howeve...
- laser cutting
- 1 kullanıcı cevapladı
276 Factors to consider when selecting focal length for laser cutting
In the process of laser cutting, the focal length is not a fixed value, but needs to be comprehensively considered based on various factors such as material characteristics, thickness, cutting require...
- laser cutting
Ignativs20400- Çözüldü
Why is the reset button on the RDC6685U controller panel invalid?
My CO2 laser equipment is paired with the RDC6685U control system, and I encountered a strange problem: when I pressed the reset button on the panel, the system did not return to normal as expected. I...
- RDC6685U
- control system
- laser cutting
- RuiDa
- 3 kullanıcı cevapladı
222 - Çözüldü
RDV6555G controller produces shaking lines when cutting corners
When using the RDV6555G controller for laser cutting, I found that the equipment performs normally in straight line operation, but there are obvious abnormalities when it reaches the position of turni...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
226 - Çözüldü
How to solve the problem of eight point edge counting error in RDC6555G controller?
My device is equipped with the RDC6555G control system, and I encountered a problem where the counting was incorrect during the eight o'clock edge patrol. Every time the edge patrol was performed, the...
- RDC6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
228 - Çözüldü
RDV6555G control system scanning shows ghosting
I have a laser cutting machine that uses Ruida's control system, model RDV6555G. Today, I noticed a ghosting during scanning, where the same straight line seems to have been traced twice, with slight ...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
236 - Çözüldü
What is the reason for the low linear power of RDV6555G controller?
When I was using the RDV6555G control system for machining, the power output of the equipment was normal when running on short straight lines, and the machining effect was stable without any obvious a...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
205
laser cutting
364
Konular594
TakipçilerCevap Bekleniyor
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.