- Çözüldü
The RDC6563FG control system has triggered a machine protection alarm
Hello everyone! My fiber laser cutting machine uses the RDC6563FG control system. I was operating it normally when the machine protection alarm light came on the control panel, and the system stopped ...
- RDC6563FG
- fiber laser
- control system
- laser cutting
- RuiDa
- 3 kullanıcı cevapladı
245 Techniques for extending the lifespan of fiber laser cutting machines
Which components of the laser cutting machine require regular maintenance? In laser cutting, multiple components work together to ensure cutting accuracy. Multiple components are also crucial during ...
- laser cutting
Michael7100- Çözüldü
RDC6585G controller cutting head cannot be controlled
When debugging the RDC6585G controller, I found that the cutting head could not be controlled properly and there was no response no matter how it was operated. At the same time, the working indicator ...
- RDC6585G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
220 Laser Cutting Stainless Steel Operation Guide
Laser cutting steps for stainless steel Laser cutting of stainless steel requires adherence to a systematic set of operating procedures. Before starting the cutting process, it is necessary to ensure...
- laser cutting
Matthew8210- Çözüldü
RDC6585G controller set positioning point invalid
I encountered an issue with setting invalid positioning points while using the RDC6585G controller for device debugging. When I tried to set the positioning point through the control panel, no matter ...
- RDC6585G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
238 - Çözülmedi
Why does the RDV6555G controller experience offset during cutting?
The control system used for my laser cutting machine is RDV6555G. Today, there was a significant cutting offset issue during processing. I changed the material for testing and the problem still exists...
- RDV6555G
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
252 - Çözüldü
Using the RDV6563FG control system, the laser triggered an alarm
I have a fiber laser equipment equipped with the RDV6563FG control system, but the laser emits a rapid alarm sound. The screen is flashing and indicating an abnormality, and the beam is interrupted. I...
- laser source
- RDV6563FG-NET
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
303 - Çözüldü
How to solve the problem of RDC6685U controller double beam equipment collision?
I started the processing, but the double beam equipment suddenly malfunctioned during processing, with one fast and one slow, causing an instant deviation and collision with the machine. I immediately...
- RDC6685U
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
232 - Çözüldü
Why can't the RDC6332NM controller start from the positioning point set on the panel?
The control system used for my device is RDC6332NM. During the machining task, I tried to activate the device by calling the preset positioning point through the controller panel, but the machine neve...
- RDC6332NM
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
286 - Çözüldü
Why is the grating protection signal of RDV6555G control system ineffective?
The controller used for my device is RDV6555G, which has been connected to a grating protection device. However, in actual operation, I tried to block the grating multiple times, but the machine conti...
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 kullanıcı cevapladı
205 - Çözülmedi
Why can't the multi-point positioning function be used on the RDC8445S controller?
My device uses the RDC8445S control system. Today, when I was processing, I set the U-axis to the rotation axis, but the original multi-point positioning function of the device cannot be used properly...
- RDC8445S
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 1 kullanıcı cevapladı
158 - Çözülmedi
: Multi-pass cutting with CCD camera registration + U-axis feed exceeding Y work area (RDV844XS(EC), RDWorks V8)
Hi everyone, we have a specific use case we’d like to try with our laser, but we aren't getting good results. Controller: RDV844XS(EC), Camera: SV300-New CCD, Software: RDWorks V8 Machine setup: Wo...
- RDWorksV8
- control system
- laser cutting
- RuiDa
- 1 kullanıcı cevapladı
118 What power fiber laser is required for cutting metal?
1. Which metals are most suitable for laser cutting? The applicability of laser cutting varies depending on the metal material. There are significant differences in the absorption and thermal conducti...
- fiber laser
- laser cutting
Ignativs8400Key parameters affecting the performance of laser cutting machine cooling system
Choosing the right type of cooling system for a laser cutting machine is only the foundation, and its detailed design and operating parameters are the key to determining the thermal management effect ...
- fiber laser
- cooling system
- CO₂ laser
- laser cutting
Gary8901Basic core skills for operating laser cutting machines
Effective operation of laser cutting machines requires comprehensive mastery of three core competencies: machine operation basics, material science knowledge, and computer-aided design (CAD) skills. T...
- laser cutting
Adrian8600
laser cutting
364
Konular594
TakipçilerCevap Bekleniyor
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.