I have recently changed the size of my Ortur LM2 Pro from the stock size to 80mm in the Y direction. I have changed the sizes within Lightburn to reflect the change. After drawing a 400mm x 800mm rectangle within the software, lightburn informs me I am out of the working area every time I try to frame the box. I checked to make sure I was within bo...

Patrick

2023-03-02

386

1

0

Recently, a team from the Fraunhofer Institute of Laser Technology (ILT) and the Leibniz Institute of Atmospheric Physics (IAP) in Germany has developed a portable lidar system that can move independently. Such systems can be produced on a large scale and combined into an operational network to provide real-time high-quality data of temperature and...

Christian

2023-03-02

414

0

0

How do I change the settings in Lightburn so it knows the laser is now twice as powerful

Clarence

2023-03-01

408

1

0

Hello I made a circle and drew a line through it and I tried to edit nodes using “t”. It didn’t do anything. Also, it doesn’t seem to allow me to add nodes to circle shapes.

Robert Evans

2023-03-01

431

1

0

Why do I have to flip everything Vertical to get it correct on the surface I am engraving?

Williams

2023-03-01

355

2

0

The application of visible laser is very extensive. Some people even say that visible laser is a better light source than LED. However, the main difficulty in its development is how to select appropriate active layer, limiting layer material and corresponding growth process.We know that the 632.8nm He-Ne laser is widely used. He-Ne laser is a gas ...

Henry

2023-03-01

435

0

0

Hi, please help me. I just downloaded lightburn to use on my new laser. I tried so many times, setting and watches video and nothing seems to work. Please help me out.

Keegan

2023-02-28

462

1

0

I have seem to lost my selection box in settings for constant power mode ? Its used for cutting and would be nice to know more about it ? I would thank you ! For any help !

Cyril

2023-02-28

292

1

0

I noticed that the new version of the software has added the option “Camera is mounted to the laser head”. Regarding this feature, I would like to know the following:1. What specific tasks can this feature help me with?2. What kind of camera do I need to prepare?3. What is the specific usage method of this feature? It would be great if...

Gilbert

2023-02-28

321

1

0

I have Ortur LM2 Machine. I recently replaced the LU 1-4 module with a Comgrow 20w module. The new module is 63mm square and the LU 1-4 is about 40x42mm. I glued a protrusion on to the side of the new module to hit the x-axis homing switch and it works fine. I relocated the y-axis homing switch to the front rail of the Ortur. It works fine if the m...

Patrick

2023-02-28

459

1

0

I have a Nova 24 machine and use lightburn. I have looking over other discussions and this and have tried everything that people have indicated. Any other thoughts on this issue?

Liam

2023-02-28

321

1

0

Because i’m new to this world I make a lot of engrave and material tests. In Lightburn there is a built-in solution to make fast cut test. Thats cool, but I need the same test with filled squares for engrave test. Is it possible to force material test to fill the squares or any option to make fast engrave tests?

Robert Evans

2023-02-28

375

1

0

Hello I'm designing a CNC diode laser machine that can cut 16-Gauge stainless steel to earn my bachelor's at the university.Since Im new to this enviroment I would like to know how to calculate the power needed to cut that deep, I've searching this forum for answers but all I can find is people estimating 150-500W and not the actual formulas or par...

Henry

2023-02-27

401

4

0

I have some 3/8 dia injection mold ejector pins that i need to square off the ends, and I would like to use my CNC to do this, so they are nice and flat on the end verses trying to do it on a bench grinder.Just curious if a standard 3/16 or 1/4 end mill would work since the pins are made with hardened steel.The list the material as H13 tool steel (...

Williams

2023-02-27

423

1

0

Hi everyone, I have purchased a used Chinese laser recently and it has had one of its limit switches removed. Probably removed because it was broken. So I purchased a new proximity switch and replaced it. Now when I home the machine it slides to the right and when it activates the switch it just stops and gives me the error, hard limit prot. It doe...

Smith

2023-02-27

400

1

0