Three Roller Type Sheet Metal Rolling Cone Machine

We are a professional manufacturer of Three Roller Type Sheet Metal Rolling Cone Machine with over 10 years of industry experience. Today, we would like to introduce to you:

Three Roller Type Sheet Metal Rolling Cone Machine is a mechanical processing equipment used to roll metal sheets into various conical objects of different diameters. Its main components include frame, drum, taper adjustment mechanism, and drive device. The taper adjustment methods of this product mainly include mechanical adjustment method, hydraulic adjustment method, and numerical control adjustment method. The specific operation method is as follows:

1. Mechanical adjustment method: By changing the distance between the upper and lower rollers to adjust the taper, reducing the distance between the upper and lower rollers at one end, cones with different taper angles can be rolled. This method usually requires the use of specialized adjustment cone rollers, such as lead screws, worm gears, etc., which can be adjusted manually or electrically.
2. Hydraulic adjustment method: using hydraulic cylinders to push the rollers to move, adjusting the position of the rollers by controlling the stroke and pressure of the hydraulic cylinders, and achieving different taper angles of the coiling machine. This method has a fast adjustment speed and high accuracy, but requires a hydraulic system and relatively high cost.

3. Numerical Control Adjustment Method: The position and motion trajectory of the roller are controlled by a numerical control system, and the motion of the cone rolling machine is programmed to achieve high-precision taper adjustment and automated production. This method requires a certain level of programming knowledge and technical proficiency, but can improve production efficiency and quality.

The operation steps of the cone rolling machine include: rolling the sheet as a whole, ensuring that the damage to the finished product is minimal after rolling, aligning the two sheet heads to make them close to the same plane without protruding outward, pressing and adjusting the sheet back and forth, using welding rods to touch one end, and pressing the back end of the cone. Then, the front end of the upper roller rolls the sheet until the front end of the sheet is aligned. After alignment, weld the gap between the plate heads and place the cone rolling machine plate in place. The welding end is at the bottom, first press and roll the plate head out, and then press and roll the whole body.

These techniques and methods can help users use Three Roller Type Sheet Metal Rolling Cone Machine more effectively to roll conical workpieces. This product is widely used in the high-precision metal structural component manufacturing industry, such as aviation, nuclear power, and other fields. These industries have high precision requirements for metal structural components, which can roll metal materials into the required conical parts to meet the production needs of manufacturing industries such as aviation and nuclear power.

Obtain detailed parameters and quotation for the Three Roller Type Sheet Metal Rolling Cone Machine.

From:

https://www.sdsmachinery.com/xinwen/show391.html