- Não resolvido
Where can I download the firmware upgrade file for the RDC6445 series controller?
Does anyone know where I can download the firmware upgrade file for the RDC6445 series controller? I could not find it on the RD official website. Thanks in advance.
- RDC6445G
- RuiDa
- Aguardando respostas
27 - Resolvido
RDC6445G controller failed to load the panel when turned on
The control system used for my device is RDC6445G. Today, I found that the panel loading was abnormal and I was unable to enter the main interface normally. There is no cursor flashing on the screen, ...
- RDC6445G
- control system
- laser cutting
- RuiDa
- 2 usuários responderam
248 - Resolvido
RDC6445G reset abnormal
My machine uses the RDC6445G controller. During the initial reset of the X-axis, everything was normal. However, after triggering the limit for the second time, the speed was very slow and the reset a...
- coordinate axis
- RDC6445G
- control system
- RuiDa
- 2 usuários responderam
94 - Resolvido
Laser cutting system RDC6445G scanning shows ghosting
The control system used for my CO2 laser cutting equipment is RDC6445G. I noticed slight ghosting at the edges of the image during the scanning process, and the cutting trajectory was no longer clear ...
- RDC6445G
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 3 usuários responderam
123 - Não resolvido
Does the RDC6445G control system support electric eye positioning?
My machine is using the RDC6445G control system. Can I confirm if the system supports the electric eye positioning function? What control software is needed?
- RDC6445G
- control system
- RuiDa
- 1 usuário respondeu
115 - Resolvido
RDC8445S repeated communication issues
Hello everyone, I’m reaching out to the community for a technical perspective, as I’m facing a recurring issue and have not yet been able to identify the root cause. Here is a clear summary of the s...
- RDWorksV8
- RDC8445S
- RDC6445G
- control system
- 2 usuários responderam
289 - Não resolvido
pressed the emergency button now has file transfer signal
i pressed the emergency button now has file transfer from a computer to the laser clip is showing and everytime i restart my laser it always shows this and i dont know how to get rid of it.. please he...
- RDC6445G
- LightBurn
- control system
- 2 usuários responderam
286 - Resolvido
Why does the HMI display "No Connected Device" when previewing files for the RDC6445G control system?
My device is using the RUIDA controller RDC6445G. I have imported the processing files into the controller and am preparing to preview the path on the HMI screen. However, when the "Preview" function ...
- RDC6445G
- control system
- CO₂ laser
- RuiDa
- 4 usuários responderam
257 - Não resolvido
Why doesn't the laser head return to its positioning point after the RDC6445G control system exits?
The control system used for my CO2 laser equipment is RDC6445G, which can return to the set positioning point after processing is completed. However, when the point exited, the laser head did not retu...
- RDC6445G
- laser head
- control system
- CO₂ laser
- RuiDa
- 1 usuário respondeu
245 - Resolvido
What is the maximum machining speed of the RDC6445G controller?
My CO2 laser cutter is equipped with the RDC6445G control system. I'd like to test how fast it can cut thin materials at maximum speed. If anyone knows the answer, please let me know. Thanks!
- RDC6445G
- control system
- CO₂ laser
- RuiDa
- 3 usuários responderam
283 - Resolvido
Why can't the RDC6445G cutting head be controlled?
I have a CO2 cutting machine with a control system of Ruida's RDC6445G. Today, while operating the machine, I found an abnormality: the system ran normally after turning on, but the cutting head could...
- RDC6445G
- control system
- CO₂ laser
- RuiDa
- 2 usuários responderam
250 - Não resolvido
RDC6445GT5(EC) HMI-GT5 dead
On Feb 9 2026 I upgraded to an RDC6445GT5(EC) with a touch screen the HMI-GT5, I wired everything except the limit switches, everything worked, motors, door switch, laser, the next day I wired the X-...
- RDC6445G
- 2 usuários responderam
274 - Resolvido
There is an issue with the X/Y axis during the power-on reset of RDC6445G
I have a CO2 laser cutting system equipped with an RDC6445G control system. During the power-on reset, I noticed an unusual situation: the X-axis quickly hit the limit switch and stopped during moveme...
- coordinate axis
- RDC6445G
- control system
- laser cutting
- RuiDa
- 2 usuários responderam
254 How to solve the problem that the CO2 cutting and engraving controller keeps pressing the limit switch after being turned on?
In CO₂ cutting and engraving equipment, if the limit switch is continuously pressed after startup, there are generally two reasons: 1. Check whether the limit switch itself is functioning properly Fi...
- RDC6442G
- RDC6445G
- control system
- CO₂ laser
- RuiDa
Caspar30015What should you do if the control system of the CO2 laser cutting and engraving series cannot be reset to its original point?
If your control system is one of the RDC6442G, RDC6445G, RDC6585G, RDC6685U, RDC6332NM, RDC6612U, or RDC8445S models from the CO2 laser cutting and engraving series and you encounter an issue where it...
- coordinate axis
- RDC6442G
- RDC6445G
- CO₂ laser
- RuiDa
Howard28322
RDC6445G
38
Tópicos24
Seguidores
Aguardando respostas
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- RDworksV8可以加工锤子画吗？
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.