I cut a cutting test card but when cutting the same material my machine does not cut through using the settings from the card. Any idea why?

John Trant

2023-03-18

332

1

0

Set the number of pulses per servo turn. When the lead screw stroke is 32mm, the servo setting is 3200 revolutions per turn, and the maximum output of the PLC is 100K. In this way, the maximum speed of the servo can only be 1850 revolutions. How can the maximum speed be 3000 revolutions?

Vasili

2023-03-17

435

1

0

I have the lose camera control issue all the time… kind of a pain to restart with shift to fix…but my other issue is many time when i open a new window it does not show up on a new tab … is there a way to fix this

Robert Evans

2023-03-18

335

1

0

I am installing lightburn on new laptop and got a couple questions.I am at the point where it found my device and is calling it GRBL, and it shows axis X=650mm & axis Y=500mm, and wants to know the dimensions of my working area is. The mm markings on the frame for X axis is 440, and Y axis is 520. On the Y axis there is a hard stop at 40 with l...

Henry

2023-03-18

317

1

0

The closed-loop controlled frequency converter can achieve closed-loop position control in the stopped state through encoder detection, locking the servo motor shaft at a fixed angle. This function is called servo motor locking or zero servo function.

Keegan

2023-03-18

343

1

0

As a refrigeration device, the main components of an industrial water chiller include a compressor, evaporator, condenser, capillary throttle valve, etc., thereby achieving the refrigeration effect of the unit. In the actual use process, it is inevitable that some faults will occur in the cooling system of the water chiller, leading to the alarm of...

David

2023-03-18

407

0

0

Laser water chiller is a water cooling device that can provide constant temperature, constant flow, and constant pressure cooling water. The working principle of a laser water chiller is to first inject a certain amount of water into the water tank inside the machine, cool the water through the cooling system of the water chiller, and then send the...

Jamie

2023-03-18

438

0

0

Hi, for a special project, I have to cut at 1000mm/sec but my machine refuse to go above what seems to be 500mm/sec. I went to the machine, modified the Idle Speed to 1000, the X axis max speed is at 1000mm/sec because I’m able to move at that speed but even if I input a cut speed of 1000, it runs lower that that.It’s not a matter of a...

Miller

2023-03-17

407

1

0

How can i flip my project ? its right on screen but burns upside down

Darren

2023-03-17

412

2

0

previously connected dev file downloaded previously. Xtool updated today. Lightburn up to date. Watched so many videos. Is this due to the xtool update?

Cyril

2023-03-17

441

1

0

So I’m tasked with making a table on our laser here at work and our software won’t hatch and won’t do pretty much anything but etch holes and lines. That’s what we get for spending 300k+ I guess. So I brought my flat pattern in to lightburn. It seems to look ok in draw mode but then I try to export it and all I get is the pe...

Smith

2023-03-17

459

1

0

In general mechanical transmission, the most widely used belt transmission is the ordinary V-belt transmission.Mechanical transmission is widely used in mechanical engineering, mainly refers to the transmission of power and motion through mechanical means. There are two types of friction drives: friction drives that transmit power through friction...

Payson

2023-03-17

283

0

0

High precision ball screw is an important component in the field of mechanical transmission. It is not only widely used in the industrial field, but also in some consumer goods fields. High precision ball screw is a mechanical transmission device that can convert rotary motion into linear motion. Its advantages lie in high conversion efficiency, hi...

Terrelle

2023-03-17

451

0

0

Recently, scientists from the Swiss Federal Institute of Technology (EPFL) and IBM announced the development of a new type of laser that is expected to have a significant impact on optical ranging technology.The laser is based on lithium niobate material, which is commonly used in the field of light modulators and can control the frequency ...

Clarence

2023-03-17

388

0

0

Anyone from ruida? We'redebatingwhether6445g or 6442g suit for our machine??

wizardEK

2022-11-12

576

2

1