chanelink logo
CHANELINK
Português

Pictures burning crooked

Categorias:
レーザ
Tags:
337
1
Ver tradução
2023-04-10

My laser is engraving pictures crooked. I have checked to make sure the OLM 3 frame is square and it is. I squared the plywood to the front of the machine. I measured the distance of the gantry to the front of the frame and it is the same. I have tried rotating the image and the plywood as you can see in the pictures. Any ideas what is going on?
C

    • Smith

      2023-04-11
      Are you running in inches? If so, this is a known firmware issue with the Ortur, and solved with a recent update.
        Ver tradução
        Responder
      Recomendações relevantes
      Coletar
      Relatório