Hi,My machine has a rdc6563f controller an i use rdcutist 3I have worked out most issues but i cannot find how to continiue a cut after a collision.If i have a part stand up and the laser head touchs it , the machine stops and an alarm is then on the screen(collision).It asks to press esc to clear.I clear the alarm and when I then press st...

ROD

2023-11-02

243

2

0

The research team led by the University of Cambridge has developed a method that allows structural modifications to be "programmed" into metal alloys during 3D printing, thereby fine-tuning their performance without the need for thousands of years of "heating and refining" processes.The new 3D printing method combines the best quality of tw...

Clarence

2023-11-01

305

1

0

I can’t view my files in lightburn, Once I open the file… there’s no data open in lightburn workspace.

Gilbert

2023-11-01

210

1

0

I have one copy of Lightburn on a desktop PC, where I do design work, and a second copy on a PC laptop, which I use to control my OLM2. When I transfer files from one computer to the other, whether by email or thumb drive, everything remains the same, except cut speed. That changes by a factor of 60: cut speeds of 1000 on the desktop are transforme...

Cyril

2023-11-01

219

1

0

Hello Guys,i’am new in the laser business and i’m trying to connect my Two Trees TTS-55 with the Lighburn Software, but it is’nt successful.I’m getting this out of the console, but i don’t know what that means:Waiting for connection…Waiting for connection…Waiting for connection…[MSG:Local access...

Kevin

2023-10-31

236

1

0

I’m trying to figure out how to control when layers/groups get printed. In particular my logo is being printed one group after another and therefore there is “enormous” whitespace waste. I know I can adjust the whitespace jog, but it would be so much faster if it would print it raster-wise one line at a time. I’ve tried weld...

Aaron

2023-10-31

209

1

0

I may simply be overthinking this but with Co2 lasers, when setting up test cards, you’re dealing with speed and power, easy enough…But what about UV, where you’re dealing with Speed, Freq, Q-Pulse? How would one go about accurately setting up a material test card specific to a UV laser to account for all three?

Abel

2023-10-31

200

1

0

Recently, the research and technological development work in plasma physics and fusion energy at the SLAC National Accelerator Laboratory of the US Department of Energy has received support and promotion from LaserNetUS for up to $28.5 million.It is reported that the Science Office of the US Department of Energy has allocated $28.5 million to pro...

Williams

2023-10-31

211

1

0

1. Evaporator small temperature difference: used to evaluate the heat exchange efficiency of the unit evaporator, with a normal value between 1 ℃ and 3 ℃.Evaporator small temperature difference=outlet temperature of chilled water - saturation temperature corresponding to evaporation pressureNote: The saturation temperature corresponding to the outl...

Smith

2023-10-31

274

1

1

error 5 autoguiado no esta habilitado en la configuracion de Grbl

David

2023-10-28

206

1

0

The update overlay button keeps turning grey and I need to choose from the camera drop down menu “none” then choose lightburn camera to get it back. It does this often while I am working on a design. It seems that it started happening since the last update. Anyone else experiencing this or know how to to repair this?

Jamie

2023-10-28

268

1

0

Hi everyone. Sorry if i placed this in the wrong section.Yesterday, I recieved my Aeon Fiber Laser ST50J. I was playing with some materials I had, and as I was testing and testing. I’d save the settings where I thought were good, in the library. Came back today and everything I had saved from yesterday is gone.Would anyone know what I could...

Henry

2023-10-28

302

1

0

I have lost t the “select objects” option from my laser drop down menuThank you

Robert Evans

2023-10-27

211

1

0

I’ve been using Lightburn to cut out some veneers for a job over the past year. Each unit contains 5 closed shapes that are identical and I have 4 units worth set up across the bed. So 20 identical shapes that should all cut the same.I’ve recently started noticing that some of my veneers are loose fitting. After a while I figured out t...

John Trant

2023-10-27

190

1

0

I am making the finger joint box for the coasters. It has worked beautifully before. Now two sides are right but the other two, the bottom fingers are correct but the side ones are too big. Looking at the program, they are right, fit perfectly on the screen but are off when lasered. Weird. Also circles are oval. This all happened after the new upda...

Jen

2023-10-27

226

1

0