How to solve the cross deviation of RDV6445G small visual cutting?
When using the RDV6445G small vision control system for cross cutting, if there is a cross deviation and the distance is not fixed, it can usually be checked from the following two aspects: 1. Check ...
- motion system
- RDV6445G
- control system
- RuiDa
Ignativs23901Using RDWorksV8, XY axis cannot be limited. How to adjust?
When using RDWorksV8 for machining, if you encounter XY axis cannot be limited, follow the following method to solve it: 1. Check the "Reverse Polarity" setting If the axis moves in the opposite dire...
- motion system
- coordinate axis
- RDWorksV8
- RuiDa
Matthew26913Abnormal movement of cutting head in CO2 cutting and engraving control system
The cutting head movement of the CO2 cutting and engraving control system is abnormal. Initially, the cutting head kept moving upwards without stopping. When switched to manual mode, the motor movemen...
- motion system
- laser head
- CO₂ laser
- laser cutting
- RuiDa
Spark25400- Risolto
Using RDWorksV8, the direction of movement is opposite to the direction of the pressed key
Today, when I was operating the RDWorksV8 software for equipment debugging, I noticed that the direction of the machine's movement was opposite to the direction indicated by the panel buttons. I check...
- motion system
- coordinate axis
- RDWorksV8
- control system
- RuiDa
- 3 utenti hanno risposto
265 CO2 cutting carving controller manual operation, Z-axis motor does not move
When using the CO2 cutting and carving series controller, switch to manual mode and press the Z+and Z - buttons on the operation panel. The Z-axis motor will not move. You can follow the following ste...
- motion system
- coordinate axis
- control system
- CO₂ laser
- RuiDa
Thomas29213- Risolto
Using RDWorksV8, repeatedly cutting shapes but not in the same position
When I use RDWorksV8 to repeatedly cut the same shape, the shape cannot be kept in its original position and deviates, resulting in inconsistent machining positions and affecting cutting accuracy and ...
- motion system
- RDWorksV8
- laser cutting
- RuiDa
- 3 utenti hanno risposto
241 - Non risolto
Using RDWorksV8, how to adjust the Z-axis step distance?
I am a beginner with RDWorksV8. I have a simple question: how to adjust the Z-axis step pitch?
- motion system
- coordinate axis
- RDWorksV8
- RuiDa
- 1 utente ha risposto
264 - Risolto
RDD6616 control system V axis no action
My RDD6616 control system does not produce any movement of the V-axis motor during the execution of the machining program. I checked the power supply and it is working properly
- motion system
- coordinate axis
- RDD6616U
- control system
- RuiDa
- 3 utenti hanno risposto
269 - Risolto
RDC6555G, I press the button to move the XY axis, but it doesn't move
The control system I am using is RDC6555G. When I try to move the X-axis and Y-axis using the directional buttons on the operation panel, no action occurs. Does anyone know why this is happening?
- motion system
- coordinate axis
- RDC6555G
- control system
- RuiDa
- 3 utenti hanno risposto
289 - Risolto
My laser engraver with the RDC6332NM only moves in one direction
My laser engravers use the RDC6332NM controller, but today I encountered a strange issue during operation: the machine only moves in one direction. Could someone please help me? Thank you.
- motion system
- RDC6332NM
- laser engraving
- control system
- RuiDa
- 2 utenti hanno risposto
285 - Risolto
My RDC6563FG control system displays a reset error
Help! My device was functioning normally before, but today when I tried to process a workpiece, the system displayed a reset error. The control system is RDC6563FG. I don't know if there are any setti...
- motion system
- coordinate axis
- RDC6563FG
- control system
- RuiDa
- 2 utenti hanno risposto
321 - Risolto
The cutting process in the RDV6555G control system is experiencing confusion
I have a laser cutting machine with a control system of RDV6555G. When I use it to cut metal works, there is confusion. I checked the transmission parts, guide rails, and sliders, etc., and everything...
- motion system
- RDV6555G
- control system
- laser cutting
- RuiDa
- 2 utenti hanno risposto
287 - Risolto
Using RDC6555G, the planned and actual positions do not match the coordinates
I am using Ruida's control system RDC6555G, and there is a coordinate mismatch between the planned target position and the actual feedback position of the servo drive. I have debugged it several times...
- motion system
- coordinate axis
- RDC6555G
- RuiDa
- 3 utenti hanno risposto
307 - Risolto
RDV6563FG-NET, A-axis reset failed, what should I do?
My control system is RDV6563FG-NET, and the A-axis reset failed. I don't know the reason, and someone told me it was a problem with the motor driver parameter settings. Do you have any ideas? Thank yo...
- motion system
- coordinate axis
- RDV6563FG-NET
- control system
- RuiDa
- 3 utenti hanno risposto
287 - Risolto
The first pixel does not connect properly on the RDC6555G control card
When I was using the machine for machining today, I couldn't connect the first point. Is this due to hardware not being properly connected? seek help! I am using the RDC6555G control system.
- motion system
- RDC6555G
- laser cutting
- RuiDa
- 3 utenti hanno risposto
293
motion system
82
Argomenti5
FollowerIn attesa di risposte
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.