JavaScript is required
logo
Chanelink
Italiano

RDD6616 control system V axis no action

Simon Praschl

My RDD6616 control system does not produce any movement of the V-axis motor during the execution of the machining program. I checked the power supply and it is working properly

Puoi rispondere a questa domanda?

Scrivi la tua risposta per aiutare chi ha questa domanda.

Risposte (3)

  • Ignativs
    Risposta accettataRisposta accettata

    What drive are you using? If it is a Rexroth driver, there are 24V and 5V drive signals, and the motherboard sends out a 5V drive signal. Don't choose the wrong one

    1
    Rispondi
    • Simon Praschl

      Oh, I see. I reconnected the 5V signal and now it can function normally

      0
      Rispondi
  • Darren

    Your problem is usually caused by the following reasons
    1. Wrong connection of motor wire
    2. The motor does not support split wiring
    3. Damaged motherboard port

    1
    Rispondi
  • Williams

    Check the motherboard ports for damage and ensure that the motor wires are properly connected

    1
    Rispondi

Domande correlate

Hai una domanda simile ma non trovi una soluzione? Pubblica la tua domanda e ricevi aiuto dalla community.

Chanelink
Chanelink
Chinese 粤ICP备20068671号-3

Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.

Accordo utentePolitica sulla privacy