1. Microcontroller systemUsing a microcontroller system to achieve motion control has a lower cost, but the development difficulty is high and the cycle is long. This solution is suitable for users with large product batches, simple control system functions, and experience in microcontroller development.2. Professional motion control PLCMan...
2024-02-1819910Siemens has innovatively upgraded its highly favored SINAMICS S210 servo drive system, further expanding its application range by adopting a new hardware architecture and next-generation V6 software.This servo drive system is suitable for high dynamic applications with a power range of 50W to 7kW, and can better support industry applications such...
2024-02-0320610Who has DVPHE3PLC? How to read data from the upper computer using 232? What data needs to be noted
2024-02-0320410With more and more technologies widely applied in industrial automation, we have entered the era of Industry 4.0. New technologies continue to emerge, empowering artificial intelligence and machine learning, data analysis, industrial networks, network security, and functional security. However, most industrial automation, as the core of all other t...
2024-01-3131910ECI and PCI advantages1. ECI:1) No need to rely on industrial computers, which can reduce the configuration requirements of PCs and reduce the volume of industrial computers;2) No need to install PCI drivers, one network cable solves the problem;3) Regardless of the number of axes, all products call a set of API functions;4) No need for PCI adapte...
2024-01-29262201. Controller: used to generate trajectory points, i.e. expected output.2. Driver: Used to convert control signals (usually speed or torque signals) from motion controllers into higher power current or voltage signals, and output them to actuators.3. actuators: such as hydraulic pumps, cylinders, linear actuators, or motors, used to output motion.4...
2024-01-2925110- 控制Advantages and disadvantages of various torque controls: servo, clutch, hydraulic, pneumatic, etc
I have come into contact with many torque control machines and always think that torque control is more useful than torque clutch, with average accuracy; The servo accuracy is good, the response is fast, but it may not be applicable to all, and the price is high; Poor air pressure accuracy; Hydraulic complexity, difficult to control.
2024-01-2923110 In the early automation industry, motion control was mostly pulse control and analog control. Later, CANopen was developed, and various Ethernet buses emerged, such as EtherCAT, PROFINET, POWERLINK, SercosIII, RTEX, and so on.Why is EtherCAT developing so rapidly both globally and in China now, mainly reflected in the following five points:...
2023-12-2618610May I ask if you are planning to use a laser displacement sensor to scan the parts, and then use a servo motor with a grinding wheel to follow the contour of the parts for polishing? How should you configure the hardware?
2023-12-2621510Industrial cameras are the core components of machine vision systems, widely used in various fields such as industrial production, urban surveying, and grain sorting, especially for quality control, production monitoring, and measurement tasks. Compared with conventional cameras, industrial cameras have the characteristics of being sturdy and durab...
2023-12-1921720The main parameters of industrial cameras include resolution, frame rate, signal-to-noise ratio, pixel depth, etc. In addition, other important parameters also include dynamic range.Dynamic range refers to the brightness range in the scene or the photosensitive range of photosensitive materials such as film, CCD, CMOS, etc. For film and pho...
2023-11-3018810Let me share my personal opinion,Industrial vision definitely requires,1. Hardware stability is beyond doubt. 7 * 24 operation should be used in many scenarios, as well as on-site working environments (temperature, dust, etc.)2. Piracy and genuine software. (Small businesses don't require it, but try to make it genuine. WIN11 Professional Editio...
2023-11-3023130AutomationDirect now offers SureServo2 servo systems that accept 460 Vac three-phase input power. With output power from 400W to 15kW, these 12 new perfectly matched sets of servo motors, drives, cables and accessories have all the features of our existing SureServo2 servo systems: onboard motion controller with registration, electronic camming and...
2023-10-2620210The motion control system is equivalent to the brain of the laser equipment, which coordinates the various components of the equipment to work together and directs the laser to accurately focus and move quickly, which is the key to the effective completion of the task of the entire laser processing. Motion control system in different industries, di...
2023-07-2836010Laser cleaning technology is a new type of clean and environmentally friendly cleaning and processing technology that has emerged in recent years. Its working principle is to use a high energy laser beam to irradiate the surface of the material, so that the irradiated pollutants expand and evaporate, so as to achieve the purpose of removing stains....
2023-07-2541010
- 暫無數據
繁体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski