When I try to combine text as shown, the Weld function works sometime and not others. I really don’t get it.

Durell

2024-10-22

206

3

0

I restarted the laser machine and this message appeared

Roderick

2024-10-25

194

1

0

In my ongoing quest to get my laser up and running, i have found the manufacturer has discontinued my machine and no replacement parts are to be had. It a Kentoktool JL5 5.5w. I have access to a Laser Tree 10w laser module with its own 12v power supply and an adapter board. The control box on the machine is 24v ( with a 24v power supply) . My quest...

Ethan

2024-10-23

207

2

0

I got a new ortur 20 watt laser and it is alot larger than the 10 watt .my laser hits the end of the frame before it hits the factory stop ( no limits switch but has bolts to make a hard stop )i can gently move the laser to the home position but cannot get the home position to be Zero to make a new home position .the new home position is -24.9 and ...

Jack Wilborn

2024-10-21

235

3

0

Handheld laser welding is a new welding method that has emerged in recent years, and it is also a new application attempt of laser in industrial production. Its principle is to rapidly heat up the workpiece locally to melt through a highly energy dense beam, forming a molten pool and achieving welding effect. Compared to traditional welding, handhe...

Marshall

2024-10-23

228

1

0

when I create a flat project it generates x and y and perfect central position.if you activate the rotating roller or spindle, the positions are significantly staggered.then the dimensions are significantly altered as is the starting point on the y axis.It’s not a roller configuration problem but a problem that I can’t understand the cause of.It i...

Jack Wilborn

2024-10-18

203

3

0

Handheld laser welding is another new application technology of laser. Its principle is to aim a highly energy dense laser beam at the material, thereby rapidly heating and melting the material locally, forming a welding interface, and ultimately achieving the welding effect. Handheld laser welding equipment mainly includes lasers, welding heads, c...

Jamie

2024-10-22

232

1

0

I’ve got an excerpt from a creation I made that the laser path optimization is playing the tune to SuperTramp’s “Take the long way home”. Can’t quite figure it out.When I have border-type fills like this, I often change to offset fill to get away from the raster whitespace. But only when it makes sense.In this creation, which happens to be a saw...

Andre J

2024-10-18

216

3

0

i have a problem with new a24 pro laser . it will connect and frame okay but when i run the file it works for about 30 seconds and then shuts down laser and locks up, i cannot do anything else until i shut down lightburn and the laser and when i try again exactly the same problem happensthe laser works perfectly on its plug in screen, and the light...

Erdogan

2024-10-14

296

6

0

Hi,I have an issue ever since I bought the Laser master 3 engraver. I cant manage to get the lines straight, the lightburn printing test doesnt even manage to engrave normal squares and I don’t know what to do in order to resolve the problem.

AL.TAL

2024-10-21

242

1

0

I’m trying to cut a project 3 ft long - so using the print and cut feature. After I cut my first of the three parts (i broke the project up into 1 ft incriments) I go to align my laser with the registration marks; however, after i move my laser head to the mark and choose “set first target position”, i then frame the registration mark and the laser...

RTP

2024-10-17

215

2

0

I fully realize that I may be doing something to cause this, but the biggest frustration I’ve faced is how LB handles layers settings when reopening a project or starting a new one. Because at times, it seems random to me.I’ve had it change for some reason right in the middle of the project when I’m only using one layer.How is it supposed to work?

Hiroko

2024-10-17

231

2

0

My problem seems to have started after I used the rotary tool. After doing some engraving on a glass I switch to another project cutting and engraving. I discovered that my y and x axes were not accurate, so I calibrated the X axis, which went fine but I never could properly calibrate the Y axis. I read that it may be because I had to close down al...

Carey

2024-10-15

223

4

0

wen you save a material test can you please make it save the “material” “text” and "border settings as well, this wil make easyer to acurately repeat the test later on

bernd.db

2024-10-16

232

3

0

90W CO2 laser single tube retrofitted with Ruida 6445G controller, started having the following problem: Output power of laser varies only up to about 25%, and beyond that stays constant.  That is, 50% power setting will provide same effect as 25% output, same for 100%. Measuring output to laser power supply (GND to LPWM1):15% = 0.73025% = 1....

8EFCC2EB

2024-09-26

356

6

0