简体中文

Scientists have developed a solar cell that can bend and soak in water

470
2024-05-08 15:48:46
查看翻译

Researchers and their partners at the RIEKN Creative Physical Science Research Center have created a flexible and waterproof organic photovoltaic film. This innovative thin film can integrate solar cells into clothing, maintaining functionality even in rainwater or washing cycles.

One of the potential uses of organic photovoltaic technology is to manufacture wearable electronic devices that can be attached to clothing, such as monitoring medical devices without the need for battery replacement. However, researchers have found that achieving waterproofing without the use of additional layers is very difficult, as the additional layer reduces the flexibility of the film.

Breakthroughs in Photovoltaic Technology
Now, a group of scientists publishing research results in Nature Communications can precisely achieve this. The challenge they face is overcoming a key limitation of previous equipment, which is that it is difficult to make it waterproof without reducing flexibility. Photovoltaic films typically consist of several layers. One layer is the active layer, which captures energy of a certain wavelength from sunlight and uses this energy to separate electrons and "electron holes" into cathodes and anodes. Then, electrons and holes can be reconnected through circuits to generate electrical energy. In previous devices, the layers for transmitting electron holes were usually generated sequentially through a layered approach.

But in the current work, researchers deposit the anode layer (in this case, the silver electrode) directly onto the active layer, thereby forming better adhesion between layers. They used a hot annealing process to expose the film to air at 85 degrees Celsius for 24 hours. The first author of the paper, Xiong Sixing, said, "Forming a thin film layer is very challenging, but we are pleased to have completed this task and ultimately be able to produce a thin film with a thickness of only 3 microns. We look forward to seeing the test results."

The results seen by the group from the test are very encouraging. Firstly, they completely immersed the film in water for four hours and found that its performance still had 89% of its initial performance. Then, they stretched the film 30% underwater 300 times and found that even with such punishment, the film still maintained 96% performance. In the final test, they placed the film in the washing machine for cyclic washing, and the film withstood the test, which was unprecedented before.

One of the corresponding authors of the paper, Kenjiro Fukuda, said, "What we have created is a method that can be widely used. Looking ahead, by improving the stability of the device in other aspects, such as exposure to air, strong light, and mechanical stress, we plan to further develop our ultra-thin organic solar cells to enable them to be used in truly practical wearable devices."

Source: sciechdaily

相关推荐
  • Dazu Photonics launched the third generation of high power fiber laser successfully increased the product power to 50kW

    In recent years, with the vigorous development of new energy and other industries, the improvement of environmental awareness and the increasing demand for new applications, the demand for fiber lasers in intelligent manufacturing is increasing, and the demand for power is also increasing, and high-power fiber lasers can significantly improve production efficiency and are widely sought after by th...

    2023-09-02
    查看翻译
  • High performance optoelectronic device developer "Micro Source Photon" completes B+round financing

    Recently, Weiyuan Photon (Shenzhen) Technology Co., Ltd. (hereinafter referred to as "Weiyuan Photon") announced the completion of a B+round of financing, with investors including Yicun Capital, Chenfeng Capital, and Beijing Guoqian Investment. The specific amount has not been disclosed. According to its official website, MicroSource Photonics was founded in November 2018, with the main members...

    2024-07-23
    查看翻译
  • Zygo showcases 3D optical metrology instruments on Space Comm

    Zygo Corporation, a business unit of AMETEK, announced that it will be showcased at the D28 booth of the Space Comm Expo held in Farnborough, UK from March 6th to 7th this year.Space Comm showcases the end-to-end supply chain of products, services, and applications that provide information and technological development for commercial aerospace enterprises, governments, and defense organizations, p...

    2024-03-01
    查看翻译
  • 150 kW Ultra High Power Laser Sensor Released

    Recently, MKS announced the launch of a brand new Ophir ® A 150 kW ultra-high power laser sensor designed specifically for measuring ultra-high power levels up to 150 kW. This sensor has excellent accuracy and reliability, suitable for industrial and defense fields.This water-cooled calorimeter has a working wavelength range of 900-1100 nm and can measure power from 10 kW to 150 kW. Its extremely ...

    2024-12-27
    查看翻译
  • Patterned waveguide enhanced signal amplification within perovskite nanosheets

    Researchers at Busan National University, led by Kwangseuk Kyhm, Professor of Ultra Fast Quantum Optoelectronics from the Department of Optics and Mechatronics, are enhancing signal amplification inside cesium bromide lead perovskite nanosheets through patterned waveguides.Perovskite is a highly attractive material in solar cell applications, but its nanostructure is now being explored as a new la...

    2024-01-10
    查看翻译