Have a compressor set up which takes 30s to build pressure on first power on. Using m8 to turn on. And off a demand valve and if I get m8 I ensure compressor is on. (small logo plc runs compressor).So question is if on change of layer can I get a pause after the m8 comes on (for the first time} so compressor can build pressure, once pressure is up...
2023-07-081.1K10What are the reasons why the motion control card is not linked
2023-07-0899810I have followed lessen one and made the project (key tag) problem I have is that it wants to cut the outline first and I have that at the bottom of theoperations so I should engrave my name next cut hole and then cut the outline do I need to set something up so that it cuts the outline last?
2023-07-071.2K10Hello, can you tell me how I can merge the separate lines or graphics so that they appear after cutting as one piece?
2023-07-071.3K10I got a longer Ray 5 5w laser engraver. Been playing around with it for a few days now, messing with different speeds/powers to find the best settings for the job I am trying. For some odd reason and I still haven’t figured it out. On the material test, it doesn’t seem to want to engrave the power/ m/mm speed on the side like it shows i...
2023-07-071.1K10With an image I created a circle with an offset by about 1 mm, and select fill. But when the laser cuts, it goes back-and-forth and back-and-forth. Takes forever. Is there a way that you can have the laser simply cut in a circular pattern - instead of going back-and-forth and back-and-forth to decrease the thousands and thousands of rapid moves?&n...
2023-07-071.4K10I’m about to reinstall the OS on my Macbook, do I need to de-activate then re-activate the Lightburn licence (thus wasting one of my 10 activations) or will it recognise that it is the same physical computer (same ssd, cpu, network device, hostname etc)?Thanks.
2023-07-0799310I’ve already got a fast rf-co2 laser source. I’m thinking about getting a galvo head for it. The lenses aren’t cheap but the galvo head is.I do see different galvo controllers on AliExpress. Are they all compatible with LB? Which one is best? We’d need one with a 4th axis output tooThe galvo controllers are the same for fibe...
2023-07-061.2K10Does anyone know what settings you need to cut 3mm acrylic with a 5.5 w laser cutter, I am so stuck.
2023-07-0698110Hi, sstruggling with making this simple clock face. searched for info and says normally caused by open shapes but thee are just humble rectangles, any help much valued.
2023-07-061.1K10Hi, how is it possible to connect two objects in an svg-file, so that LightBurn only see one line to cut. On the picture in the example if I zoom in, then I can realize that LightBurn sees two lines to cut.
2023-07-061.3K10I have xTool D1 20w and wonder if there is any way/setting to cut 1/4" birch plywood without dark brown burns?
2023-07-061.1K10GF Machining Solutions has launched a new version of the Computer-aided manufacturing (CAM) software Laser CAM, which is part of the Laser Suite 360 software package.At the EPHJ trade show held in Geneva (Switzerland), GF Machining Solutions launched a new advanced software, Laser CAM. Laser CAM is included in the Laser Suite 360 1.13.0 software ...
2023-07-051K10I’d like to cut out these two tree shapes using a perforated cut. I want to hide the “skip” spots under the tree branches where they are not so visible, since they stand out against the charring of the rest of the perimeter cut.How do I specify the starting point so I can set a distance that places the “skip” spots wh...
2023-07-051.1K10Hi, I am trying to laser cut some parts for a model boat. I scanned the relevant section of the plan and saved it as a PDF file. I imported into Lightburn and used the trace tool but everything comes out as double lines and it is impossible to get a smooth cut, likewise with the engrave part. In the example, I want to engrave the deck planking, the...
2023-07-051.1K10
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski