I've been working with a Wattsan 0503 with the Ruida RDC6445S controller for 3 years and suddenly my machine has a problem. I turned to the reseller in the EU, but until today have gotten no solution so I turn to you. When I try to burn a simple test file, no matter how (Lightburn, RDWorks or as RD copied into memory), the controller displays onl...

0880C1A8

09-29

452

39

1

While cutting on the Atomstack X24 Pro, the laser head encountered an obstacle on the work surface. Since then, the y-axis movement has not been performed correctly. The movement and noise are like rattling.Can anyone tell me what I should check to find the cause and, if possible, eliminate it?

jessie

2 天前

56

0

0

What setting in LaserGRBL controls turning on/off the Laser Focus Light?

Vasili

2 天前

50

0

0

I am preparing to carve slate. Before that, what pigment should I use to color the slate？

David

4 天前

78

2

0

Can Lasergrbl be used for carving and cutting in the same project?My machine is a 10W laser

Christian

10-28

94

3

0

I just got a LE 4040 5.5W laser. How do I install the rotating attachment? I need a laser rotating roller with 360-degree rotation, three width settings, 195mm length, and 30–200mm diameter for use with an engraving machine.I can't find any settings to configure.

Terrelle

3 天前

74

1

0

Laser tube cutting machines hold a pivotal position in metal processing, enabling the fabrication of complex shapes, precise connections, and accurate cuts. They have revolutionized industries ranging from furniture manufacturing to aerospace. Scientific parameter optimization can significantly enhance cutting quality, increase production speed, an...

Patrick

2 天前

58

0

0

Laser welding technology is increasingly applied in modern manufacturing. However, when welding aluminum alloys and copper alloys, these special materials present significant challenges that require specialized techniques to overcome.1. Core Welding ChallengesBoth aluminum and copper alloys present similar fundamental difficulties:Physical Prope...

Darren

2 天前

68

0

0

During the use of laser cutting machines, it is inevitable to encounter various problems, which can lead to unsatisfactory processing results. Here are 10 common problems that cause laser cutting failures.1. Contaminated Protective LensesTouching protective lenses with bare hands or neglecting to clean off dust can significantly reduce their tran...

Gilbert

3 天前

81

0

0

Can LaserGRBL be compatible with CNC/milling machines? What should I pay attention to? Do I need to understand CAD?

Smith

10-27

105

2

1

1. Can diode laser cutting cut transparent acrylic?After fine adjustment of relevant parameters, the diode laser (≥ 30 W) can cut transparent acrylic with a thickness of about 6 millimeters.Laser PowerUse 65–70 % of the diode’s peak output to balance cut quality and speed.Cutting SpeedAim for 5–8 mm/s: slower speeds risk excessive melting; faster...

Payson

4 天前

70

0

0

I am looking for the best diode laser between $2000 and $3000. Reliability, usability, support, and functionality are all important.

Cyril

10-25

129

2

0

The weather is getting colder day by day, and machines and equipment, like humans, need to be kept warm. The following article introduces the key points related to antifreeze for laser cutting machines.1.Do not turn off the chillerAfter the laser cutting machine is not working, do not turn off the water cooler when ensuring that the power supply w...

Darren

10-28

94

0

0

Laser cutting of thick steel plates has become a part of daily manufacturing, but laser cutting of thick plates still faces some challenges: energy must penetrate deeply, molten material must be cleanly discharged, and the cutting edge must remain stable over long distances. The following are the main challenges faced by the workshop and mature sol...

Miller

10-22

139

2

1

Myth 1: High equipment costsReality: Although the initial investment in a laser tube cutting machine may seem substantial, the long-term operational costs can be competitive compared to other cutting methods. Laser tube cutting machines offer high efficiency, minimal material waste, and reduced setup times, resulting in lower overall production cos...

jessie

10-27

117

0

0