How to adjust travel speeds when “HOMING”

Z-Axis passes home position at end of job

Version 1.3.01, Y axis will not cut

The researchers use a hybrid of lasers to control huge currents at super-fast speeds

Engraving lines with different speeds Gweike Cloud 50W CO2

When I turn on my Atomstack X30 the jog controls in Lightburn do not work, when I hit home, it noisily move to the left of the x axis and keeps pounding away on the edge of the y axis without stopping

How to swap X and Y axis

Laser cutting machine Y axis motor in the process of rotation sound?

Using + and - axis value directions in Lightburn

Y-Axis doesn’t move and makes sounds

6445G Controller Z Axis readings will not show correct values

6563F moves manually on the panel according to Z-axis, and the cutting head does not move.

When RDC6563F is used, XY axis does not move manually

XY axis does not reset

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.

Switch to the manual state, press the Z+and Z - buttons on the operation panel, and the Z-axis motor will not move

When pressing Z - or Z+for a longer time (about 3-4S), the Z axis will go down or up all the time, and it is normal to press Z - or Z+for a shorter time.

The panel did not prompt hard limit protection when Z-axis reached the hard limit switch

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certai

Press Z-axis to move manually on the panel, and the cutting head does not move